I am having pressure issues between my magazines and my gun.
With a fully charged magazine when I pull the trigger I get a weak little spit that is not much stronger than the spring closing the bolt without a magazine in the gun at all. The BBs get stuck in the Hop Up Bucking and you can even see them through the bolt. It doesn't even go that far down the barrel.
Three times when I pulled the trigger it just vented the propane in a big hisss.
This is my first Airsoft gun so I don't have a clue as to what I am doing.
So my first thought is to check out the seal between the magazine and the gun. Right?
Upon looking at the cylinder assembly parts 4, 125, 126, 129 this is where the gas comes from the magazine into the gun. I intend to replace this assembly and the Magazine Nozzle Seal part number 151.
I know that the magazines are charged because of the discharge I get when I remove the magazine and empty it.
My other train of thought,
Is there some way that the trigger is not working correctly?
Thanks for any input,
P.S. I finally got a 288mm x 6.01mm Edgi tightbore but now I can't shoot it.