Jump to content


CQR Mod 2 + MOE Handguard: What lipo battery will fit?

MOE handguard lipo cqr mod 2 battery

  • Please log in to reply
6 replies to this topic

#1 rigma_one

rigma_one

    Newbie

  • Members
  • Pip
  • 22 posts
  • Gender:Male
  • Location:NYC
  • Country:

Posted 27 September 2012 - 09:06 PM

Hi All,

I want to make the switch to lipo and use a MOE handguard.

What 11.4v lipo will fit?


Thanks in advance, and sorry if this has been covered; I didn't find anything in my searches.

Regards,
rigma_one

#2 rigma_one

rigma_one

    Newbie

  • Members
  • Pip
  • 22 posts
  • Gender:Male
  • Location:NYC
  • Country:

Posted 27 September 2012 - 09:12 PM

Moderators, kindly close this topic; after more searches, I found my answer.

Thanks,
rig_

#3 Chuck S

Chuck S

    Guru

  • Members
  • PipPipPipPip
  • 1,315 posts
  • Gender:Male
  • Location:Cleveland, Ohio
  • Country:

Posted 28 September 2012 - 02:56 AM

And the answer was?  Others may want to know...

-- Chuck

#4 rigma_one

rigma_one

    Newbie

  • Members
  • Pip
  • 22 posts
  • Gender:Male
  • Location:NYC
  • Country:

Posted 30 September 2012 - 07:09 PM

To my understanding, this battery will fit and is in line with KWA's max specs:

BOL 11.1V 1400mAh 15C Li-Po Battery

http://shop.ehobbyas...cells-pack.html

I will try to post dimensions once it arrives.

Regards,
rig_

#5 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,646 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 30 September 2012 - 07:21 PM

rigma_one - You should have no troubles with that battery fitting.

#6 rigma_one

rigma_one

    Newbie

  • Members
  • Pip
  • 22 posts
  • Gender:Male
  • Location:NYC
  • Country:

Posted 30 September 2012 - 07:55 PM

Thanks for the confirmation.

Will post the dimensions so users have a definitive answer on size even if they're using non-lipo as well.

#7 rigma_one

rigma_one

    Newbie

  • Members
  • Pip
  • 22 posts
  • Gender:Male
  • Location:NYC
  • Country:

Posted 25 October 2012 - 06:14 PM

Approximate battery dimensions in inches:

3.75 x 1.25 x .75

I bought the real steel version of the MOE handguard and had to make some minor alterations for the battery to fit.  There are a few plastic nubs on the lower half of the handguard that needed to be snapped off, along with the heatguard.

UPDATE:

This 2-cell battery also fits very nicely in the handguard.  Very inexpensive as well:

http://www.hobbyking...RSOFT_Pack.html

Edited by rigma_one, 10 November 2012 - 10:04 PM.






Also tagged with one or more of these keywords: MOE handguard, lipo, cqr, mod 2, battery

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users