Jump to content


propane adaptor


  • Please log in to reply
8 replies to this topic

#1 mannyp

mannyp

    Enthusiast

  • Members
  • PipPip
  • 38 posts
  • Country:

Posted 06 July 2012 - 01:59 PM

i just got my first pistol a kwa ptp my question is going to run propane I know I need to put silicone oil in the adaptor I use classic army silicone oil for my aeg will this work or do I need some thicker oil the adaptor I am use is a madbull one

#2 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 06 July 2012 - 02:06 PM

Hi mannyp. Congratulations on your purchase. For the first 45 days I suggest using green gas so you don't void your warranty. If you must use propane, I suggest getting a bottle of 100% pure silicon oil, something between 20wt to 30 wt. You can find these at RC Hobby shops, as well as on the internet. You can use your little bottle of silicon oil KWA provides but then try to get something that is pure silicon oil. Most silicon oil sprays, which (correct me if I'm wrong) your classic army oil is, have things in the spray that will cause damage to certain pieces in your gun. So, try to stay away from silicon oil sprays...

#3 mannyp

mannyp

    Enthusiast

  • Members
  • PipPip
  • 38 posts
  • Country:

Posted 06 July 2012 - 02:42 PM

thank on the advice

#4 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 06 July 2012 - 02:55 PM

No problem man, enjoy your new gun!

#5 mannyp

mannyp

    Enthusiast

  • Members
  • PipPip
  • 38 posts
  • Country:

Posted 06 July 2012 - 03:14 PM

I just look on online I order this team assoiated silicone shock oil 20 wt will this work

#6 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 06 July 2012 - 05:32 PM

Link please?

#7 mannyp

mannyp

    Enthusiast

  • Members
  • PipPip
  • 38 posts
  • Country:

Posted 06 July 2012 - 06:22 PM

http://www.amainhobb...ck-Oil-20wt-2oz

#8 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 06 July 2012 - 07:35 PM

View Postmannyp, on 06 July 2012 - 06:22 PM, said:

Looks good! Just be sure not to add too much lubrication to each magazine charge as too much oil to the hop up bucking will cause it to swell and jam bb/ and prevent them from being shot out of the gun. Oil every 2-4 magazines, just by using a drop or two, and you should be good to go!

#9 mannyp

mannyp

    Enthusiast

  • Members
  • PipPip
  • 38 posts
  • Country:

Posted 07 July 2012 - 01:08 PM

thanks again




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users