Jump to content


Proprietary parts.


  • Please log in to reply
3 replies to this topic

#1 randombullet

randombullet

    Enthusiast

  • Members
  • PipPip
  • 179 posts
  • Gender:Male
  • Location:Atlanta, GA
  • Interests:Airsoft, running(XC and Track), swimming, and challenges.
  • Country:

Posted 25 June 2012 - 10:28 AM

Can someone give me all the proprietary parts on a KWA 2GX version 2 gearbox?

#2 vanevery

vanevery

    Specialist

  • Members
  • PipPipPip
  • 981 posts
  • Gender:Male
  • Country:

Posted 25 June 2012 - 12:48 PM

View Postrandombullet, on 25 June 2012 - 10:28 AM, said:

Can someone give me all the proprietary parts on a KWA 2GX version 2 gearbox?

Mainly compression parts:
Hop-up Unit
Cylinder Nozzle
Air Nozzle
BB Ramp...Maybe. Not 100% sure about this part.

A lot of TM Compatible parts will technically work.
Working and performing to spec are not the same thing.
I have tried endless after market cylinder heads / cylinder nozzles in my KWA m4 / m16 guns.
TM Hop-up's, etc, etc......Gen1 and 2gx.
None of the after market compression parts performed as well as KWA stock compression parts.
A stronger spring will not compensate either.

I am sure there are mods that can be done to help after market compression parts work better than they do by just dropping them in, but KWA compression parts are extremely good.

There are still endless mods that can be done to KWA guns as well as after market parts that can be added.
Just be aware of the compression parts sensitivity to change.

#3 randombullet

randombullet

    Enthusiast

  • Members
  • PipPip
  • 179 posts
  • Gender:Male
  • Location:Atlanta, GA
  • Interests:Airsoft, running(XC and Track), swimming, and challenges.
  • Country:

Posted 25 June 2012 - 03:36 PM

Thanks. I was hoping that the selector plate is not part of the list.

Another thing to add onto the list of KWA only stuff, Trigger contacts and slide.

#4 Guest_Allizard_*

Guest_Allizard_*
  • Guests

Posted 25 June 2012 - 05:22 PM

Technically you can still change out the air nozzle.  You just might not get the best compression that is it.  

Not sure what you mean by cylinder nozzle.  You can still change out the entire cylinder/piston set.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users