Jump to content

KP8C non NS2 Mag leaking

  • Please log in to reply
1 reply to this topic

#1 lpesce



  • Members
  • PipPip
  • 56 posts

Posted 09 April 2009 - 05:24 PM

For KWA staff:

I have the older KP8C and the mag started leaking recently.

I followed all the suggestions I found and none worked.

Following the mag diagram, I disassembled the bottom part of the tank, and I found that part 908 is no longer sealing properly.

I checked the shop, and it is listed as out of stock.

Being this an older model, I would assume this part is no longer produced.

My thinking now would be to put a bead of silicone around part 908, and let it dry, hopefully sealing and fixing the problem.

Would this be a good repair in you opinion, or is the gas going to break down the silicon seal I put (due to probably cold cycles).

Thank you

#2 Guest_allizard_*

  • Guests

Posted 09 April 2009 - 09:39 PM

I use something also Goop.  Which is also a silicone base glue and it works for all of my old Western Arms r-Type mag.  So your idea is pretty close solution to mine.  Just make sure you let it dry for a day before using them.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users