Jump to content


M9 Breach Is Broken?


  • Please log in to reply
4 replies to this topic

#1 badkarmaas

badkarmaas

    Specialist

  • Members
  • PipPipPip
  • 413 posts
  • Gender:Male
  • Location:Tennessee
  • Interests:Playing airsoft, guitar, snakes.
  • Country:

Posted 01 June 2012 - 10:02 AM

Hello, I've had a m9 ptp tactical for over 4 months. I've sent it back once, I use propane BTW, they said ad long as I put silicone oil in it, which I did, the oil that came with the AI propane adapter kit. So I was shooting, and the slide locks and the part that's on the breach that I guess pushes the bb gets stuck and locks into the slide. I call kwa, and I get " well that's from using propane " I was told to use it by a person I talked to over phone. I don't remember their name. Now I'm goimg to have to send my gun and lose $60 now. I've had toyake my sr10 to a tech for bad piston, bad piston head, and a new spring, in less than a month of use.  Two broken KWA's. My question is, how do I remove the breach so I can replace it
. I was told the rails that held it were the problem, as they both came out


#2 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 01 June 2012 - 11:32 AM

Yep, you are right the breach, (chamber block) part 320 is missing its rails which don't hold your gas nozzle in place. This will result in your nozzle sticking out and keeping your slide from returning back into normal firing position. Please take a look at my disassembly guide. You can see how to remove everything down to the rocket valve in it. Here's a link since it may be hard to find since it may be in the middle amongst threads...

http://kwausa.com/fo...?showtopic=7551

So all you need to do is go to store.kwausa.com and purchase a new part 320. Unscrew the cap with the seal, put it on the new piece, take your nozzle and springs off and attach them to your new part 320 and reinstall into you gun. Putting the new part 320 into your gun may be a little stiff. Push in on your rails to fit it into your slide. And the rest you could follow the guide!! Good luck... Here's a link to the piece you need to buy:

http://store.kwausa....aseplate-1.aspx

Edited by Outlaw1995, 01 June 2012 - 11:33 AM.


#3 badkarmaas

badkarmaas

    Specialist

  • Members
  • PipPipPip
  • 413 posts
  • Gender:Male
  • Location:Tennessee
  • Interests:Playing airsoft, guitar, snakes.
  • Country:

Posted 01 June 2012 - 12:28 PM

Thank you. You described exactly what I was talking about. I'm not really familiar with gas gun upgrading, so should I do this myself or get a tech? Thanks

#4 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 01 June 2012 - 01:14 PM

View Postbadkarmaas, on 01 June 2012 - 12:28 PM, said:

Thank you. You described exactly what I was talking about. I'm not really familiar with gas gun upgrading, so should I do this myself or get a tech? Thanks
No problem man! You do have a choice. If you don't feel comfortable following the steps in the guide you could always send it in to KWA so they can service it. But that would cost a lot more than buying a simple piece. It is all up to you, if you send it in to KWA they will thoroughly inspect it and fix the problem as well. You can pay extra time and money letting KWA fix it, or if you're comfortable enough, you could buy the piece and fix it yourself for a fraction of the cost. I suggest if you do go by yourself, that you buy an extra pair of cylinder return springs if you accidentally bend them while taking them off the gun. They are only like 2.75 each. Also, if you do choose to do it yourself, make sure you have the correct Allen key sizes to take the slide apart.

#5 badkarmaas

badkarmaas

    Specialist

  • Members
  • PipPipPip
  • 413 posts
  • Gender:Male
  • Location:Tennessee
  • Interests:Playing airsoft, guitar, snakes.
  • Country:

Posted 01 June 2012 - 01:26 PM

I guess I will do it myself for the challenge. Thanks for your help.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users