Jump to content


Look What I Found


  • Please log in to reply
23 replies to this topic

#1 niko_gpsy

niko_gpsy

    What's a Warranty?

  • Super Moderator
  • PipPipPipPip
  • 5,878 posts
  • Gender:Male
  • Location:Atlanta, GA
  • Interests:Keeping those damn squirrels from putting their filthy little paws on my peaches in my backyard. Oh, Yes. It's not just a hobby, its a passion!!
  • Country:

Posted 17 April 2012 - 03:06 PM

I wanted to wait until I had a little more time to experiment with this product but I am so far very happy with the results.  So I thought I would post and share about this new product I have found that I have been using on the slide rails in all my GBB pistols and SMG's.
This is a spray made by Super Lube and it's a dry lubricant.  Just simply spray it on and wipe off the excess after it dries for few minutes.  It coats metal parts with a dry film of lubricant that will not attract dirt.  I have been testing this out for few weeks now and I have not had any problems and my slide action is silky smooth.  I no longer use silicone oil on my slides anymore. Try it and let me know what you think..........................I used this once about 3 weeks ago in all my GBB guns and I have not had to recoat after hundreds of rounds through them.

DISCLAIMER: Your results may vary. LOL


Posted Image

EDIT:  Only use it on the slide rail on the lower frame and slide.  This product does not corrode plastics but do not use it in your cylinder.  I have not tried this on the hammer mechanisms.  I still use a little silicone oil for that but this product does have possibilities.

#2 ransackedsnake7

ransackedsnake7

    Enthusiast

  • Members
  • PipPip
  • 71 posts
  • Gender:Male
  • Country:

Posted 17 April 2012 - 03:13 PM

where can i purchase this?

#3 niko_gpsy

niko_gpsy

    What's a Warranty?

  • Super Moderator
  • PipPipPipPip
  • 5,878 posts
  • Gender:Male
  • Location:Atlanta, GA
  • Interests:Keeping those damn squirrels from putting their filthy little paws on my peaches in my backyard. Oh, Yes. It's not just a hobby, its a passion!!
  • Country:

Posted 17 April 2012 - 03:18 PM

Ace Hardware, Lowes, HomeDepot

#4 ransackedsnake7

ransackedsnake7

    Enthusiast

  • Members
  • PipPip
  • 71 posts
  • Gender:Male
  • Country:

Posted 17 April 2012 - 03:18 PM

thanks ill try it

#5 aaps59

aaps59

    Guru

  • Members
  • PipPipPipPip
  • 1,149 posts
  • Gender:Male
  • Location:New York City
  • Interests:Airsoft, photography, cars, computers.
  • Country:

Posted 17 April 2012 - 03:24 PM

Ive been looking for something like this for a while. Unfortunately, a while ago I purchased something not too similar to it, and well, it wasn't too good for my GBB's haha. But I will definitely give this one a try. Il try and pick a can up from my "local" industrial hardware supply.

#6 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 17 April 2012 - 07:20 PM

Do you think it would be a good idea to spray the guide rod of a pistol with this to give it an even more silky smooth recoil/blowback action?

#7 niko_gpsy

niko_gpsy

    What's a Warranty?

  • Super Moderator
  • PipPipPipPip
  • 5,878 posts
  • Gender:Male
  • Location:Atlanta, GA
  • Interests:Keeping those damn squirrels from putting their filthy little paws on my peaches in my backyard. Oh, Yes. It's not just a hobby, its a passion!!
  • Country:

Posted 17 April 2012 - 10:41 PM

That's another area this could work well but I usually don't apply any lube on the guide rod.

#8 greatwatermelon

greatwatermelon

    I Break GUNS!

  • Members
  • PipPipPipPip
  • 1,078 posts
  • Gender:Male
  • Location:Irvine, CA
  • Country:

Posted 17 April 2012 - 11:20 PM

I definitely wanna give this one a try. :D

#9 niko_gpsy

niko_gpsy

    What's a Warranty?

  • Super Moderator
  • PipPipPipPip
  • 5,878 posts
  • Gender:Male
  • Location:Atlanta, GA
  • Interests:Keeping those damn squirrels from putting their filthy little paws on my peaches in my backyard. Oh, Yes. It's not just a hobby, its a passion!!
  • Country:

Posted 18 April 2012 - 04:56 AM

View Postgreatwatermelon, on 17 April 2012 - 11:20 PM, said:

I definitely wanna give this one a try. :D
Yeah but you will break something and end up blaming me............................ :cry:

#10 greatwatermelon

greatwatermelon

    I Break GUNS!

  • Members
  • PipPipPipPip
  • 1,078 posts
  • Gender:Male
  • Location:Irvine, CA
  • Country:

Posted 18 April 2012 - 10:06 AM

Finally! Someone to blame other than myself! :rofl1:

#11 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 18 April 2012 - 02:57 PM

View Postniko_gpsy, on 17 April 2012 - 10:41 PM, said:

That's another area this could work well but I usually don't apply any lube on the guide rod.
I don't either but I like the sound of the metal being coated in a "dry film of lubricant", and the fact that it makes the action silky smooth. My guess is that it would make the spring nice and smooth too-- especially on the USP series.

#12 niko_gpsy

niko_gpsy

    What's a Warranty?

  • Super Moderator
  • PipPipPipPip
  • 5,878 posts
  • Gender:Male
  • Location:Atlanta, GA
  • Interests:Keeping those damn squirrels from putting their filthy little paws on my peaches in my backyard. Oh, Yes. It's not just a hobby, its a passion!!
  • Country:

Posted 18 April 2012 - 05:04 PM

Agreed. I may try it myself.

#13 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,565 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 18 April 2012 - 05:09 PM

It's on my list to try...

#14 Alan

Alan

    Enthusiast

  • Members
  • PipPip
  • 94 posts
  • Gender:Male
  • Location:Redlands, California
  • Interests:Airsoft, Soccer, Games, Tennis.
  • Country:

Posted 23 April 2012 - 09:17 PM

So how did it work for you guys? if the results are positive i am buying this as well.. do i just aply as if it was silicone oil? and no silicone is needed if i use this right??

#15 niko_gpsy

niko_gpsy

    What's a Warranty?

  • Super Moderator
  • PipPipPipPip
  • 5,878 posts
  • Gender:Male
  • Location:Atlanta, GA
  • Interests:Keeping those damn squirrels from putting their filthy little paws on my peaches in my backyard. Oh, Yes. It's not just a hobby, its a passion!!
  • Country:

Posted 24 April 2012 - 04:21 AM

View PostAlan, on 23 April 2012 - 09:17 PM, said:

So how did it work for you guys? if the results are positive i am buying this as well.. do i just aply as if it was silicone oil? and no silicone is needed if i use this right??
This product is only used on the slide rails and possibly the recoil spring rod.  You just spray it on carefully using their spray straw attachment along the rails.  Wait a few minutes to dry and wipe off run off if any and you are good to go.

#16 khaos7

khaos7

    Enthusiast

  • Members
  • PipPip
  • 36 posts
  • Country:

Posted 08 May 2012 - 09:35 PM

Would Liquid Wrench Dry Lube work also? I happen to have a can just lying around.

#17 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,565 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 09 May 2012 - 01:04 PM

View Postniko_gpsy, on 24 April 2012 - 04:21 AM, said:

This product is only used on the slide rails and possibly the recoil spring rod.  You just spray it on carefully using their spray straw attachment along the rails.  Wait a few minutes to dry and wipe off run off if any and you are good to go.
I cleaned and lubed my son's KMP8C with this and it's cycling just fine.  No silicone at all on the rails.  I like it!

#18 niko_gpsy

niko_gpsy

    What's a Warranty?

  • Super Moderator
  • PipPipPipPip
  • 5,878 posts
  • Gender:Male
  • Location:Atlanta, GA
  • Interests:Keeping those damn squirrels from putting their filthy little paws on my peaches in my backyard. Oh, Yes. It's not just a hobby, its a passion!!
  • Country:

Posted 09 May 2012 - 01:44 PM

View Postkhaos7, on 08 May 2012 - 09:35 PM, said:

Would Liquid Wrench Dry Lube work also? I happen to have a can just lying around.
It may work but make sure that it will not have an adverse reaction to any polymer or plastics.

View Postgcw360, on 09 May 2012 - 01:04 PM, said:

I cleaned and lubed my son's KMP8C with this and it's cycling just fine.  No silicone at all on the rails.  I like it!
So is it silky smooooth............................? lol

#19 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,565 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 09 May 2012 - 02:41 PM

View Postniko_gpsy, on 09 May 2012 - 01:44 PM, said:

It may work but make sure that it will not have an adverse reaction to any polymer or plastics.


So is it silky smooooth............................? lol
Yes...yes it is.

#20 aaps59

aaps59

    Guru

  • Members
  • PipPipPipPip
  • 1,149 posts
  • Gender:Male
  • Location:New York City
  • Interests:Airsoft, photography, cars, computers.
  • Country:

Posted 27 June 2012 - 02:26 PM

Okay, finally found some in my warehouse. Not the same brand, but hopefully should work. I hope to try it this weekend.
Posted Image




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users