Jump to content


Kwa Sr10 Compatible With Magpul Pts Ubr & Moe Pistol Grip?

Magpul UBR PTS KWA SR10 Lipo

  • Please log in to reply
7 replies to this topic

#1 (MAB)

(MAB)

    Newbie

  • Members
  • Pip
  • 12 posts
  • Country:

Posted 09 March 2012 - 02:45 PM

Just have a few questions. Does the Magpul PTS UBR stock work with the KWA SR10? No modding involved to fit a Lipo? Also does the Magpul PTS MOE pistol grip work with the SR10? If the UBR does work what would be the best Lipo to get? Preferably a high mAh to last full days. Ive heard this one works http://www.airsoftgi...oducts_id=10061 but its out of stock everywhere.

Thanks in advance

#2 AciDeX

AciDeX

    Enthusiast

  • Members
  • PipPip
  • 68 posts
  • Gender:Male
  • Country:

Posted 09 March 2012 - 03:38 PM

The UBR does not have any room to store a battery.

I'm pretty sure that the PTS UBR needs a separate kit to install onto a KWA and most other AEGs. I've not tried personally, that's just what I heard.
http://www.airsoftex...roducts_id=3597

I have the ACM UBR and it does not need any separate kits to install onto a KWA.
Posted Image

The MOE PTS Pistol grip will also work, I had to file/sand the back of the beaver tail a tad to get it to fit right with the sling plate. Other than that it was a pretty easy install.

*Edit - this is the UBR that I have: http://www.ebay.com/...=item3cc241d736

Edited by AciDeX, 09 March 2012 - 03:42 PM.


#3 aaps59

aaps59

    Guru

  • Members
  • PipPipPipPip
  • 1,149 posts
  • Gender:Male
  • Location:New York City
  • Interests:Airsoft, photography, cars, computers.
  • Country:

Posted 10 March 2012 - 09:53 AM

 AciDeX, on 09 March 2012 - 03:38 PM, said:

The UBR does not have any room to store a battery.

I'm pretty sure that the PTS UBR needs a separate kit to install onto a KWA and most other AEGs. I've not tried personally, that's just what I heard.
http://www.airsoftex...roducts_id=3597

I have the ACM UBR and it does not need any separate kits to install onto a KWA.

Hows the quality on that stock? Im considering getting a different stock from the same guy for my SR10

http://www.ebay.com/...=item3cc241f589

#4 AciDeX

AciDeX

    Enthusiast

  • Members
  • PipPip
  • 68 posts
  • Gender:Male
  • Country:

Posted 10 March 2012 - 10:27 AM

It's not bad actually. It's not cheap abs plastic. More like a descent polymer. There is a pretty hilarious typo on one of the detachable cheek rests though, it reads "Manufactured in Boulder, Coorado". Other than that it's super sturdy and I have no worries of it breaking.

Sent from my LS670 using Tapatalk

#5 aaps59

aaps59

    Guru

  • Members
  • PipPipPipPip
  • 1,149 posts
  • Gender:Male
  • Location:New York City
  • Interests:Airsoft, photography, cars, computers.
  • Country:

Posted 10 March 2012 - 10:49 AM

 AciDeX, on 10 March 2012 - 10:27 AM, said:

It's not bad actually. It's not cheap abs plastic. More like a descent polymer. There is a pretty hilarious typo on one of the detachable cheek rests though, it reads "Manufactured in Boulder, Coorado". Other than that it's super sturdy and I have no worries of it breaking.

Sent from my LS670 using Tapatalk
Assuming you had to do a bit of rewiring, was it difficult to rewire to make the fuse fit and the coil wiring fit?

#6 (MAB)

(MAB)

    Newbie

  • Members
  • Pip
  • 12 posts
  • Country:

Posted 10 March 2012 - 11:30 AM

 AciDeX, on 10 March 2012 - 10:27 AM, said:

It's not bad actually. It's not cheap abs plastic. More like a descent polymer. There is a pretty hilarious typo on one of the detachable cheek rests though, it reads "Manufactured in Boulder, Coorado". Other than that it's super sturdy and I have no worries of it breaking.

Sent from my LS670 using Tapatalk
Haha thats awesome, I live right next to Boulder in Colorado. I did not know that Magpul manufactured anything here.

#7 AciDeX

AciDeX

    Enthusiast

  • Members
  • PipPip
  • 68 posts
  • Gender:Male
  • Country:

Posted 10 March 2012 - 12:51 PM

 aaps59, on 10 March 2012 - 10:49 AM, said:

Assuming you had to do a bit of rewiring, was it difficult to rewire to make the fuse fit and the coil wiring fit?
Since I installed it on my KM4A1 my gun is already wired up front.
Hence the PEQ box. ;)

 (MAB), on 10 March 2012 - 11:30 AM, said:

Haha thats awesome, I live right next to Boulder in Colorado. I did not know that Magpul manufactured anything here.
I think they actually manufacture from Erie, CO but all their products say Boulder, CO


Sent from my LS670 using Tapatalk

Edited by AciDeX, 10 March 2012 - 01:35 PM.


#8 aaps59

aaps59

    Guru

  • Members
  • PipPipPipPip
  • 1,149 posts
  • Gender:Male
  • Location:New York City
  • Interests:Airsoft, photography, cars, computers.
  • Country:

Posted 10 March 2012 - 01:03 PM

 AciDeX, on 10 March 2012 - 12:51 PM, said:

Since I installed it on my KM4A1 my gun is already wired up front.
Hence the PEQ box. ;)

Sent from my LS670 using Tapatalk
Ahh didn't notice it was a KM4A1 haha
Very nice build





Also tagged with one or more of these keywords: Magpul, UBR PTS KWA SR10 Lipo

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users