Jump to content


Lm4 Build! Share Your Ideas Here!

lm4 build custom

  • Please log in to reply
111 replies to this topic

#81 xX Chaotic Cam

xX Chaotic Cam

    Enthusiast

  • Members
  • PipPip
  • 236 posts
  • Gender:Male
  • Location:South-Eastern Kentucky
  • Interests:Airsoft(no kidding?), real firearms, cars.
  • Country:

Posted 18 April 2012 - 09:05 AM

View Postwurger, on 17 April 2012 - 02:57 PM, said:

For a RDS you can also check out Primary Arms. Their service is excellent and prices are not much more then an airsoft clone RDS.

I'm hoping the LM4 Magpul will be compatible with RS charging handles. I'm using BCM Gunfighter handles in all of my RS AR's, and would hate to go back to a standard handle on the GBBR.
I will let you know when the LM4 comes out, considering I have one right here to put in my LM4. :P

Edited by xX Chaotic Cam, 18 April 2012 - 09:06 AM.


#82 Slayer750

Slayer750

    Enthusiast

  • Members
  • PipPip
  • 31 posts
  • Gender:Male
  • Country:

Posted 29 April 2012 - 11:14 AM

I've updated my plays for my future LM4. Thought I'd post a pic here.

Posted Image

That RIS, and other parts in this picture, are not available on the PMG website, so I had to make them out of many, many shapes (read: many, many hours)... Goes to show how crazy the wait for the LM4 has made me!  :lol:

Edited by Slayer750, 29 April 2012 - 11:14 AM.


#83 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 29 April 2012 - 11:17 AM

View PostSlayer750, on 29 April 2012 - 11:14 AM, said:

I've updated my plays for my future LM4. Thought I'd post a pic here.

Posted Image

That RIS, and other parts in this picture, are not available on the PMG website, so I had to make them out of many, many shapes (read: many, many hours)... Goes to show how crazy the wait for the LM4 has made me!  :lol:

What color are those magpul parts?

#84 Slayer750

Slayer750

    Enthusiast

  • Members
  • PipPip
  • 31 posts
  • Gender:Male
  • Country:

Posted 29 April 2012 - 11:24 AM

FDE

#85 aaps59

aaps59

    Guru

  • Members
  • PipPipPipPip
  • 1,149 posts
  • Gender:Male
  • Location:New York City
  • Interests:Airsoft, photography, cars, computers.
  • Country:

Posted 29 April 2012 - 11:57 AM

I see why Outlaw was confused. The color used is actually slightly whiter than FDE is. I wish Magpul had a polymer color like the one you chose though. That'd be sweet. But im sure this tint is achievable with the proper spray paint!

#86 xX Chaotic Cam

xX Chaotic Cam

    Enthusiast

  • Members
  • PipPip
  • 236 posts
  • Gender:Male
  • Location:South-Eastern Kentucky
  • Interests:Airsoft(no kidding?), real firearms, cars.
  • Country:

Posted 29 April 2012 - 12:05 PM

View PostSlayer750, on 29 April 2012 - 11:14 AM, said:

I've updated my plays for my future LM4. Thought I'd post a pic here.

Posted Image

That RIS, and other parts in this picture, are not available on the PMG website, so I had to make them out of many, many shapes (read: many, many hours)... Goes to show how crazy the wait for the LM4 has made me!  :lol:
I have the same RIS! :wub:

#87 Slayer750

Slayer750

    Enthusiast

  • Members
  • PipPip
  • 31 posts
  • Gender:Male
  • Country:

Posted 29 April 2012 - 02:01 PM

View PostxX Chaotic Cam, on 29 April 2012 - 12:05 PM, said:

I have the same RIS! :wub:

Not exactly, I think, but similar. IIRC, you have the TRX Extreme. The RIS depicted is my best replication of the Troy Alpha 13", which is the next generation of the TRX-E. Note the locking mechanism at the rear of the RIS compared to the TRX-E. However, I did also make the TRX-E 11" in PMG as well.

If you want the PMG code for either, let me know. However, the code is like 200 pages in Microsoft Word... :lol:

#88 Slayer750

Slayer750

    Enthusiast

  • Members
  • PipPip
  • 31 posts
  • Gender:Male
  • Country:

Posted 29 April 2012 - 02:04 PM

View Postaaps59, on 29 April 2012 - 11:57 AM, said:

I see why Outlaw was confused. The color used is actually slightly whiter than FDE is. I wish Magpul had a polymer color like the one you chose though. That'd be sweet. But im sure this tint is achievable with the proper spray paint!

Yea, it does seem a bit closer to UDE than to FDE. However, this color seems closer to FDE than the other stock PMG brown color, to me anyways.

You can actually get Magpul furniture in UDE from Larue. http://www.laruetact...actical-ude-kit
Posted Image

Edited by Slayer750, 29 April 2012 - 02:06 PM.


#89 xX Chaotic Cam

xX Chaotic Cam

    Enthusiast

  • Members
  • PipPip
  • 236 posts
  • Gender:Male
  • Location:South-Eastern Kentucky
  • Interests:Airsoft(no kidding?), real firearms, cars.
  • Country:

Posted 29 April 2012 - 02:35 PM

View PostSlayer750, on 29 April 2012 - 02:01 PM, said:


Not exactly, I think, but similar. IIRC, you have the TRX Extreme. The RIS depicted is my best replication of the Troy Alpha 13", which is the next generation of the TRX-E. Note the locking mechanism at the rear of the RIS compared to the TRX-E. However, I did also make the TRX-E 11" in PMG as well.

If you want the PMG code for either, let me know. However, the code is like 200 pages in Microsoft Word... :lol:
I have the alpha, good sir. I know the difference. :P

#90 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 29 April 2012 - 03:52 PM

Thanks for the link. That color is truly different and I think it actually looks pretty kool. Too bad I don't run ACU anymore.

#91 Slayer750

Slayer750

    Enthusiast

  • Members
  • PipPip
  • 31 posts
  • Gender:Male
  • Country:

Posted 29 April 2012 - 04:26 PM

View PostxX Chaotic Cam, on 29 April 2012 - 02:35 PM, said:

I have the alpha, good sir. I know the difference. :P

I sincerely apologize then! For some reason I thought I read in some other thread that you have a TRX-E.

#92 aaps59

aaps59

    Guru

  • Members
  • PipPipPipPip
  • 1,149 posts
  • Gender:Male
  • Location:New York City
  • Interests:Airsoft, photography, cars, computers.
  • Country:

Posted 29 April 2012 - 06:35 PM

View PostSlayer750, on 29 April 2012 - 02:04 PM, said:


Yea, it does seem a bit closer to UDE than to FDE. However, this color seems closer to FDE than the other stock PMG brown color, to me anyways.

You can actually get Magpul furniture in UDE from Larue. http://www.laruetact...actical-ude-kit

Posted Image
I was actually looking at UDE not too long ago, I totally forgot about it. This may be a game changer for my LM4...

View PostOutlaw1995, on 29 April 2012 - 03:52 PM, said:

Thanks for the link. That color is truly different and I think it actually looks pretty kool. Too bad I don't run ACU anymore.

You ran ACU?

Edited by aaps59, 29 April 2012 - 06:35 PM.


#93 Slayer750

Slayer750

    Enthusiast

  • Members
  • PipPip
  • 31 posts
  • Gender:Male
  • Country:

Posted 30 April 2012 - 12:09 AM

Do it aaps! Not only does it look great, but its also unique!

#94 aaps59

aaps59

    Guru

  • Members
  • PipPipPipPip
  • 1,149 posts
  • Gender:Male
  • Location:New York City
  • Interests:Airsoft, photography, cars, computers.
  • Country:

Posted 30 April 2012 - 03:44 AM

View PostSlayer750, on 30 April 2012 - 12:09 AM, said:

Do it aaps! Not only does it look great, but its also unique!
I would actually. But they don't have the stuff that I would actually want! Im really hoping for a Magpul STR stock, MOE+ grip, and hand guard.

#95 Nitemare

Nitemare

    Enthusiast

  • Members
  • PipPip
  • 130 posts
  • Country:

Posted 13 May 2012 - 05:19 PM

Current plan:

CTR stock
M2 aimpoint w/ cantilever mount
EOTech magnifier w/ FTS mount
AG-43 grip

Posted Image

I'll see how I like the dual optic setup. I'm doing it because I hated trying to use my ACOG in CQB. If it doesn't work well though, I'll just suck it up and swap back and forth between the ACOG and aimpoint during gameplay.

Edited by Nitemare, 13 May 2012 - 05:22 PM.


#96 Dmoney Schmidt

Dmoney Schmidt

    Enthusiast

  • Members
  • PipPip
  • 30 posts
  • Gender:Male
  • Location:Marietta, GA
  • Country:

Posted 18 June 2012 - 06:14 PM

This is what I was thinking of doing. Madbull Daniel Defense 12" Omega, Low-Profile Gas Block, and 20" Government Profile Barrel. A Magpul USA STR stock and Madbull Gemtech HALO QD barrel extension to go with the Madbull 509mm 6.01mm TBB will be added as well. I haven't decided on a 552 or XP whatever EOtech replica and 3x magnifier with "flip to side" mount or Aim 4x32 Tri-Illuminated scope with red dot on top. What do you guys think? PM me or something. Plus OD/tan alternating RS Magpul XTM, RVG, NCstar Bi-Pod, and an Aim Sports or other light (maybe). Also can't decided to buy this or an SR10 or an SR12. Lol so many choices I really want a KWA AEG but maybe I should just say forgets electric and go gas. I love my KWA Mac11!


Edited by Dmoney Schmidt, 18 June 2012 - 06:22 PM.


#97 R_King91303

R_King91303

    Specialist

  • Members
  • PipPipPip
  • 461 posts
  • Gender:Male
  • Location:Canoga Park, CA
  • Interests:Airsoft, Texas Hold'em, Research (learning new shizz)
  • Country:

Posted 18 June 2012 - 07:39 PM

View PostDmoney Schmidt, on 18 June 2012 - 06:14 PM, said:

509mm 6.01mm TBB will be added as well.

Madbull makes inner barrels for GBBs??


Posted from my iPhone

#98 BoobieM4H

BoobieM4H

    Guru

  • Members
  • PipPipPipPip
  • 1,072 posts
  • Gender:Male
  • Location:SAN JOSE, CA
  • Interests:IF IT USES GREEN GAS..I MAKE IT SHOOT BETTER!
  • Country:

Posted 18 June 2012 - 08:21 PM

View PostR_King91303, on 18 June 2012 - 07:39 PM, said:


Madbull makes inner barrels for GBBs??


Posted from my iPhone

Negative..I haven't seen any.

Sent from my DROID2 using Tapatalk 2

#99 akiraspeedstar

akiraspeedstar

    Guru

  • Members
  • PipPipPipPip
  • 1,130 posts
  • Gender:Male
  • Country:

Posted 18 June 2012 - 11:42 PM

View Postakiraspeedstar, on 14 April 2012 - 10:25 PM, said:

Here's what I'm hoping to build...

Posted Image

I already have every accessory in the picture with the exception of the rail, I want a Madbull Noveske 10" though I'm unsure if it'll fit.

Got it pretty close...

Posted Image

#100 Dmoney Schmidt

Dmoney Schmidt

    Enthusiast

  • Members
  • PipPip
  • 30 posts
  • Gender:Male
  • Location:Marietta, GA
  • Country:

Posted 19 June 2012 - 06:20 AM

Oh ok so negative on the Madbull inner, but what about everything else. Does anyone make a good barrel for GBB? Wait what's the matter with putting a different barrel in it? Is it the end of it that the BB's feed into or something? Could I mod it to work?

Edited by Dmoney Schmidt, 19 June 2012 - 06:27 AM.






Also tagged with one or more of these keywords: lm4, build, custom

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users