Mk Series Metal Outer Barrel And Slide Wear.
Posted 05 February 2012 - 06:47 PM
Top of the barrel through the ejection port.
Left side of the front slide tabs, has some finish wear but no metal wear.
On the left side of the outer barrel there's a little metal wear but not much.
Here is the only place on the slide. That I could find wear from the outer barrel.
Bottom of the outer barrel
The top of the outer barrel is where most of the wear is.
The shiny part is were it hits the slide not the gas system.
Posted 05 February 2012 - 07:29 PM
Posted 06 February 2012 - 11:51 PM
Posted 07 February 2012 - 06:59 AM
Propane and metal outer barrel with no problem after 65K rounds is amazing. Although I am still skeptical of propane use I appreciate your report. Thanks!
Posted 07 February 2012 - 03:39 PM
Posted 07 February 2012 - 04:55 PM
Posted 07 February 2012 - 04:57 PM
Posted 07 February 2012 - 05:26 PM
Posted 07 February 2012 - 05:59 PM
PS: Anyone that has shot 45,000+ rounds. With the polymer barrel post pictures. So we can see the deference in wear.
Edited by Desert Punk, 10 February 2012 - 11:25 PM.
Posted 26 March 2014 - 07:41 PM
Left side of the barrel.
Top of the barrel.
Bottom of the barrel
Back left side of the barrel.
The silver part is where the barrel hits the slide.
Top of the slide.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users