Jump to content


Selector Switch


  • Please log in to reply
9 replies to this topic

#1 AndrewKoby

AndrewKoby

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 31 May 2008 - 09:01 AM

I was wondering how to remove the selector switch because i'm swaping out my black grip for a tan one.

#2 Guest_Radix_*

Guest_Radix_*
  • Guests

Posted 06 June 2008 - 09:30 AM

Remove magazine and slide. Use an appropriate sized steel punch to punch out part #88 to remove the mainspring housing (#187).  Punch out #61 to remove #78.  Remove #72, #71, and #60.  Remove #187 (selector switch) and while pulling out of frame, you'll need to disengage #59.  Reverse steps for re-installation.

#3 AndrewKoby

AndrewKoby

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 10 June 2008 - 04:03 PM

View PostRadix, on Jun 6 2008, 10:30 AM, said:

Remove magazine and slide. Use an appropriate sized steel punch to punch out part #88 to remove the mainspring housing (#187).  Punch out #61 to remove #78.  Remove #72, #71, and #60.  Remove #187 (selector switch) and while pulling out of frame, you'll need to disengage #59.  Reverse steps for re-installation.

How do I lift part 47 and its components out of the frame?

Edited by AndrewKoby, 10 June 2008 - 05:46 PM.


#4 AndrewKoby

AndrewKoby

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 13 June 2008 - 04:59 PM

View PostAndrewKoby, on Jun 10 2008, 05:03 PM, said:

How do I lift part 47 and its components out of the frame?

Anyone know how to do this?  I need to know by Sunday because I need to use my USP in a game.  Thanks.

#5 AndrewKoby

AndrewKoby

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 16 June 2008 - 02:59 PM

Come on, no one knows how to do this?  I've tried just about everyting I can think of and it still seems that something is holding on to the frame near the hammer.

#6 Guest_Radix_*

Guest_Radix_*
  • Guests

Posted 16 June 2008 - 03:36 PM

What you've requested is not very DIY friendly.  Please keep in mind that there's a great possibility of destroying a very delicate part that is currently irreplaceable!

!!! Proceed with caution !!!



Remove parts #53, 74, 48, and 82.  Be extremely careful removing #82. Do not pull on the exposed end or you will destroy that spring clip and we do not stock that item.  Use a small needle nose plier and insert into frame to locate the open end of spring clip.  Compress the spring and remove from frame.  Number 47 should be free from the ABS frame.  Good luck!

#7 AndrewKoby

AndrewKoby

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 16 June 2008 - 05:39 PM

View PostRadix, on Jun 16 2008, 04:36 PM, said:

What you've requested is not very DIY friendly.  Please keep in mind that there's a great possibility of destroying a very delicate part that is currently irreplaceable!

!!! Proceed with caution !!!



Remove parts #53, 74, 48, and 82.  Be extremely careful removing #82. Do not pull on the exposed end or you will destroy that spring clip and we do not stock that item.  Use a small needle nose plier and insert into frame to locate the open end of spring clip.  Compress the spring and remove from frame.  Number 47 should be free from the ABS frame.  Good luck!

I have part 82 out safely, but part 74 only budjes a little.  It won't come off the frame.-

#8 Guest_Radix_*

Guest_Radix_*
  • Guests

Posted 17 June 2008 - 08:12 AM

Assuming you've removed the hammer assembly already, the only thing that will be keeping #74 from being removed is part #59.  You'll need to trip it forward, towards the magazine well, holding on to it while removing #74 with a needle nose plier.

#9 AndrewKoby

AndrewKoby

    Newbie

  • Members
  • Pip
  • 7 posts

Posted 17 June 2008 - 02:34 PM

That was it, thank you.

#10 mcinanni

mcinanni

    Newbie

  • Members
  • Pip
  • 1 posts
  • Location:Rochester NY

Posted 06 May 2009 - 06:40 PM

I must be lost. I cannot find part #187.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users