Jump to content


Official KWA G36c Photo Gallery


  • Please log in to reply
58 replies to this topic

#1 Guest_allizard_*

Guest_allizard_*
  • Guests

Posted 14 February 2009 - 08:18 PM

Give the G36c some loving.... show me how you pimp your G36 here.  Same rules apply here, you might show your gun with KWA Logo.  At least one of the picture.

I'll show mine first.  This is taken more than a year ago.  Shortly after I gotten the gun I wrote a review and play with a few parts.

Posted Image

Basically I was testing if the gun can fit CA parts and comparing the finish.  Well.. least to say... everything from CA G36k can transfer to KWA G36c.

I'll take another picture tomorrow.  I spend a few hours today prep the gun for next week event.

#2 Guest_allizard_*

Guest_allizard_*
  • Guests

Posted 15 February 2009 - 03:00 PM

Alright, this is the G36 I'm going take to next game event.

Posted Image

Posted Image

Posted Image

Posted Image

Parts list.
New KWA bucking.
Guarder 363mm 6.03mm TBB
Classic Army G36k foregrip
Classic Army HK51 outer barrel. added foam padding inside the barrel to stablized the inner barrel as well.
Private Part M4 mag well conversion.
Bushnell Holosight

Everything else is still stock.  It's been over 75k round and still the 1st gen of gearbox shell, non-heat treated gears. And 1st gen piston.  Shooting 380fps average.

#3 bandshark

bandshark

    Enthusiast

  • Members
  • PipPip
  • 46 posts
  • Location: CA

Posted 15 February 2009 - 08:18 PM

View Postallizard, on Feb 15 2009, 03:00 PM, said:

Alright, this is the G36 I'm going take to next game event.

Posted Image

Posted Image

Posted Image

Posted Image

Parts list.
New KWA bucking.
Guarder 363mm 6.03mm TBB
Classic Army G36k foregrip
Classic Army HK51 outer barrel. added foam padding inside the barrel to stablized the inner barrel as well.
Private Part M4 mag well conversion.
Bushnell Holosight

Everything else is still stock.  It's been over 75k round and still the 1st gen of gearbox shell, non-heat treated gears. And 1st gen piston.  Shooting 380fps average.
     Very nice Allizard!  How well does the Private Part M4 mag well conversion function? Also are you using the kwa high cap magazine with it?  

O.T.  I'm surprised to see you use anything other than iron sights tho...LOL.     But technically its not a CQB now  :lol:

#4 Guest_allizard_*

Guest_allizard_*
  • Guests

Posted 15 February 2009 - 11:14 PM

I got plenty of guns for CQB.   TM P90, MP7, M4 Patriot, LR300... etc....

This G36 is for outdoor.  I normally don't use optics but this is exception because my Bushnell is sight in pretty close with this gun.  If I use the iron sight it will shoot a little too high.

I am using Mag mags mid caps.   M4 mag well conversion does work pretty well with it.

#5 Doctor Kajita

Doctor Kajita

    Enthusiast

  • Members
  • PipPip
  • 163 posts
  • Location:San Francisco, CA

Posted 16 February 2009 - 07:35 PM

Very cool, thanks for giving me some ideas!

#6 Stealthmaster14

Stealthmaster14

    Specialist

  • Members
  • PipPipPip
  • 423 posts
  • Location:here :D
  • Interests:airsoft DUH, guitar, Jesus, video games, sports...etc

Posted 17 February 2009 - 09:07 AM

View Postallizard, on Feb 16 2009, 12:14 AM, said:

I got plenty of guns for CQB.   TM P90, MP7, M4 Patriot, LR300... etc....

This G36 is for outdoor.  I normally don't use optics but this is exception because my Bushnell is sight in pretty close with this gun.  If I use the iron sight it will shoot a little too high.

I am using Mag mags mid caps.   M4 mag well conversion does work pretty well with it.


Ever thought about purchasing a scoped G36 carrying handle with a rail on top and then attaching your EOtech to the top rail?  

It's like the best of both worlds; you get a scope and a RDS.  The eye relief is pretty bad, but it's far from unusable. (works great with flakjaks)

#7 Guest_allizard_*

Guest_allizard_*
  • Guests

Posted 17 February 2009 - 10:12 PM

View PostStealthmaster14, on Feb 17 2009, 09:07 AM, said:

Ever thought about purchasing a scoped G36 carrying handle with a rail on top and then attaching your EOtech to the top rail?  

It's like the best of both worlds; you get a scope and a RDS.  The eye relief is pretty bad, but it's far from unusable. (works great with flakjaks)

Most of the time I've found a scope really not necessary when playing outdoor.  My other playing guns are just using iron sight.  Besides, I don't like to add too much accessories on my gun unless it's for photo shoot or for specific reason like a flash light for CQB.  I want a light weight gun that's easy to carry.  G36 is the answer.

#8 kiljoy209

kiljoy209

    Newbie

  • Members
  • Pip
  • 4 posts
  • Location:Muskegon, MI

Posted 16 May 2009 - 03:23 PM

MY g36C- pdi 6.01, sniper stock.. This gun is awesome 390 fps with .25's. I have recently shortened it up because I built a SPR out of my KM16. This gun is light and hits hard!

Attached Files


Edited by kiljoy209, 16 May 2009 - 03:56 PM.


#9 4ss4ssin

4ss4ssin

    Enthusiast

  • Banned
  • PipPip
  • 50 posts
  • Gender:Male

Posted 16 May 2009 - 10:39 PM

http://viewmorepics....mageID=13395090

My G36c

#10 Ruthless1

Ruthless1

    Newbie

  • Members
  • Pip
  • 23 posts

Posted 12 June 2009 - 09:50 AM

Here is my Baby :)

KWA G36C
Classic Army G36K Rail System
First Factory Flat Top Kit For G36C
G&P G36 Folding Buttstock
Battleaxe G36 to M4 Magazine Adapter
First Factory G36 High Grip
JBU 6.03mm High Precision Barrel 407 mm

#11 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,555 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 12 June 2009 - 10:24 AM

View PostRuthless1, on Jun 12 2009, 01:50 PM, said:

Here is my Baby :)

KWA G36C
Classic Army G36K Rail System
First Factory Flat Top Kit For G36C
G&P G36 Folding Buttstock
Battleaxe G36 to M4 Magazine Adapter
First Factory G36 High Grip
JBU 6.03mm High Precision Barrel 407 mm

Very nice.  Which outer barrel is it?

#12 Ruthless1

Ruthless1

    Newbie

  • Members
  • Pip
  • 23 posts

Posted 12 June 2009 - 01:51 PM

View Postgcw360, on Jun 12 2009, 01:24 PM, said:

Very nice.  Which outer barrel is it?

Its actually a Bravo Barrel Extender K Style Adapter - AirsoftOutletNW for 35.00

The KG36 was not very nice about using anything else - so I added the extension and K barrel length!

#13 nameless

nameless

    Enthusiast

  • Members
  • PipPip
  • 49 posts

Posted 24 June 2009 - 05:45 PM

Here is mine.  It's stock except for a 2G bucking and the paint job.

Posted Image Posted Image Posted Image

#14 azzauzi

azzauzi

    Enthusiast

  • Members
  • PipPip
  • 251 posts
  • Gender:Male
  • Location:Olympia WA
  • Interests:Gearwhoring, Milsim, KWA, food, travel, archery/bowhunting.
  • Country:

Posted 24 June 2009 - 07:55 PM

View Postnameless, on Jun 24 2009, 06:45 PM, said:

Here is mine.  It's stock except for a 2G bucking and the paint job.

Posted Image Posted Image Posted Image


thats an excellent paintjob btw. I normally dont like painjob but thats definatly an exception.

#15 Wintersx866

Wintersx866

    Specialist

  • Members
  • PipPipPip
  • 428 posts
  • Gender:Male
  • Location:United States

Posted 24 June 2009 - 11:03 PM

View Postazzauzi, on Jun 24 2009, 10:55 PM, said:

thats an excellent paintjob btw. I normally dont like painjob but thats definatly an exception.
It is a very good paintjob indeed and I wonder what a painjob would be like  :lol:

#16 nameless

nameless

    Enthusiast

  • Members
  • PipPip
  • 49 posts

Posted 25 June 2009 - 05:41 AM

Thanks guys.  It was my first attempt at painting a gun (airsoft or real).

#17 Guest_camowolf_*

Guest_camowolf_*
  • Guests

Posted 05 August 2009 - 12:17 AM

Here's mine- it's not a KWA yet, but externally, this is what it will look like. I'm going to need to go buy more paint though... I'm out.
Posted Image

#18 Guest_Valen_*

Guest_Valen_*
  • Guests

Posted 05 August 2009 - 12:02 PM

These are some great looking g36's. I hope to be an owner of a KWA g36 soon myself - then I've got my work cut out for me to get up there with you guys. :)

#19 4ss4ssin

4ss4ssin

    Enthusiast

  • Banned
  • PipPip
  • 50 posts
  • Gender:Male

Posted 10 August 2009 - 04:04 PM

Here is mine now.

#20 alextle2003

alextle2003

    Newbie

  • Members
  • Pip
  • 9 posts

Posted 04 November 2009 - 05:36 PM

hey camo wolf you selling that monster you just posted up? I would buy it in a heart beat. :dribble:




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users