Jump to content


134A For Kmp9


  • Please log in to reply
6 replies to this topic

#1 br14n27

br14n27

    Enthusiast

  • Members
  • PipPip
  • 34 posts
  • Country:

Posted 13 July 2011 - 04:53 PM

Just wondering, has anyone used 134a gas in their mp9 successfully?

#2 Guest_allizard_*

Guest_allizard_*
  • Guests

Posted 13 July 2011 - 05:00 PM

We have tested Kmp9 with 134a gas.  I does cycle on Semi but using Full Auto will freeze the gun and not enough to cycle the bolt.   Are you trying to lower the FPS?

#3 br14n27

br14n27

    Enthusiast

  • Members
  • PipPip
  • 34 posts
  • Country:

Posted 13 July 2011 - 07:59 PM

View Postallizard, on 13 July 2011 - 05:00 PM, said:

We have tested Kmp9 with 134a gas.  I does cycle on Semi but using Full Auto will freeze the gun and not enough to cycle the bolt.   Are you trying to lower the FPS?

Thanks for the response. I am trying to lower the fps. I have seen the dangerwerx valve but I need to get my gun shooting 300fps or less. I was thinking of using the valve in combination with 134a but I guess thats out the door. Its not too big of a deal, I'll just stick to the semi only and field games.

Thanks again,
Brian

#4 Guest_allizard_*

Guest_allizard_*
  • Guests

Posted 13 July 2011 - 10:56 PM

300 fps... that's really low.  Most indoor field that I know off will accept 350 fps below.

#5 niko_gpsy

niko_gpsy

    What's a Warranty?

  • Super Moderator
  • PipPipPipPip
  • 5,854 posts
  • Gender:Male
  • Location:Atlanta, GA
  • Interests:Keeping those damn squirrels from putting their filthy little paws on my peaches in my backyard. Oh, Yes. It's not just a hobby, its a passion!!
  • Country:

Posted 14 July 2011 - 04:19 AM

View Postallizard, on 13 July 2011 - 10:56 PM, said:

300 fps... that's really low.  Most indoor field that I know off will accept 350 fps below.
I think even 350 is too low.  Indoor arenas around here are 400fps or less. We southerners love high fps in close quarters. JK. lol

#6 Guest_allizard_*

Guest_allizard_*
  • Guests

Posted 14 July 2011 - 12:42 PM

Just for the record, we are about to release a low-power bolt (below 350fps) for the KMP9 and MP7 very soon.

#7 br14n27

br14n27

    Enthusiast

  • Members
  • PipPip
  • 34 posts
  • Country:

Posted 14 July 2011 - 02:03 PM

Yeah, but here in dallas, using guns that are 300 or lower is the only way we will be able to use full auto without any minimum engagement distances. From what I am hearing, this is the fps the insurance company approves of.

@niko
Right now, we are allowed to have 400 fps guns but you can't use it under 20 ft. People have been complaining that switching to their sidearm everytime a room needs to be cleared is too much hassle. Also, instinct can get people hurt. If someone all of a sudden pulls infront of you and you have your aeg out, chances are you will shoot them at point blank because they scared you.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users