Jump to content


M18C Problem


  • Please log in to reply
2 replies to this topic

#1 chedder101

chedder101

    Newbie

  • Members
  • Pip
  • 1 posts
  • Country:

Posted 01 April 2011 - 05:01 PM

when i pull the trigger on my m18c, the trigger stays locked back until all the gas has leaked out through the barrel. is this due to the hammer not disengaging? worked great for the first few mags today and then started doing this.

#2 BlackCloud

BlackCloud

    Newbie

  • Members
  • Pip
  • 9 posts
  • Gender:Male
  • Location:Los Angeles, California
  • Interests:Airsoft, and Engineering
  • Country:

Posted 08 May 2011 - 10:18 PM

This is common, what often happens is the valve is broken or the cylinder return springs are worn out. Happens all the time. take the slide off and look, and if there is no black plastic thingy inside your cylinder then presto that's more often then not the problem. If you don't feel comfortable their are people that can help.

#3 jeg0013

jeg0013

    Newbie

  • Members
  • Pip
  • 3 posts
  • Country:

Posted 17 May 2011 - 10:50 AM

I Had the same problem with my M17. I replaced the Jet valve (Airsoft GI sells metal ones now for 3.75 + shipping) and now it works beautifully. I don't recommend getting another plastic one. They shatter entirely too fast. Mine broke within 1200 shots, and I keep my guns extremely well lubricated.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users