Jump to content


KWA KG36 - 3rd Party Compatibility List


  • Please log in to reply
51 replies to this topic

#1 Guest_Radix_*

Guest_Radix_*
  • Guests

Posted 02 May 2008 - 09:02 AM

This is the official 3rd party compatibility list.  Only 100% compatible (drop in) parts will be listed here. There will be 2 ratings for each of the parts, "KWA TESTED" or "USER TESTED".  

"KWA TESTED" ratings are for parts sent to us by their manufacture for testing and verification.  If we find the submitted parts to be 100% compatible with our products we will list them as "KWA TESTED".  Please keep in mind, "KWA TESTED" rating is not an official endorsement of the manufacture or the part(s) or a guarantee of it's performance.  

"USER TESTED" ratings are based on user's own experience and has not been officially verified.  If at anytime the product is proofed to be non-compatible with KWA products, the listing will be promptly removed.

Feel free to post in this thread or PM me to be added to the list.



EXTERNAL

1.  Private Parts G36 magwell conversion kit. (USER TESTED)



INTERNAL




MAGAZINES




BATTERIES




BBs

1. KSC Perfect 6mm BB's 0.2g (KWA TESTED)
2. KSC Perfect 6mm BB's 0.25g (KWA TESTED)
3. KSC Perfect 6mm BB's 0.3g (KWA TESTED)

#2 P.S.I.

P.S.I.

    Newbie

  • Members
  • Pip
  • 1 posts

Posted 27 May 2008 - 09:54 AM

The Private Parts G36 magwell conversion kit fits & feeds perfectly on the KWA KG36C.

#3 hawkeyes39

hawkeyes39

    Newbie

  • Members
  • Pip
  • 2 posts

Posted 29 November 2008 - 08:21 PM

STAR Midcaps, Excel .25's, and the Bigout H-nub all work fine.  
Prometheus Hopup buckings require a little modification to the barrel, as those buckings are much thicker than the stock bucking.
Powerizer 4200 MaH 8.4v works.

#4 FPDoc

FPDoc

    Newbie

  • Members
  • Pip
  • 19 posts

Posted 06 January 2009 - 11:48 AM

Systema 507mm TB with Systema bucking
G&P G36 frontset with Bipod
G&P Carry handle with 3.5x scope (tight fit but works)
G&G G36 KV stock
Intellect 8.4 3300
BB's: Excel 0.25's. G&G 0.2 and 0.25 bios.
All fit.
Muzzle velocity is 350+ with 0.25's. I didnt change any of the internals so far.

Edited by FPDoc, 06 January 2009 - 11:50 AM.


#5 thesmokingman

thesmokingman

    Enthusiast

  • Members
  • PipPip
  • 32 posts

Posted 01 March 2009 - 02:13 PM

External:
SOCOM Gear magwell conversion works and fits perfectly

Internal:
Prometheus purple bucking needs trimmed as it is long
Element H-nub fits and works perfectly

Edited by thesmokingman, 01 March 2009 - 02:16 PM.


#6 Ruthless1

Ruthless1

    Newbie

  • Members
  • Pip
  • 23 posts

Posted 12 June 2009 - 09:55 AM

Classic Army G36K Rail System - Perfect Fit!

First Factory Flat Top Kit For G36C - Back Pin is a little loose after install - Super Glue Fix

G&P G36 Folding Sniper Buttstock - MAJOR PAIN!  Had to remove and modify locking device for floding feature from original stock and place in Sniper Stock.  Required about 2 hours to mod and install.

First Factory G36 High Grip - Perfect Fit

#7 roadracer

roadracer

    Newbie

  • Members
  • Pip
  • 2 posts

Posted 29 June 2009 - 01:06 PM

Classic Army G36 hop up DOES NOT work in place of KWA version.  There is air leak some where.  BBs will not shoot at original velocity.  Also, bb feed from factory mag is horrible.  Sometimes 2-3 bbs come out at the same time.

#8 nameless

nameless

    Enthusiast

  • Members
  • PipPip
  • 49 posts

Posted 20 July 2009 - 12:51 PM

King Arms 95 round mags don't fit.  MAG midcaps work fine for me.

Edited by nameless, 20 July 2009 - 12:53 PM.


#9 nameless

nameless

    Enthusiast

  • Members
  • PipPip
  • 49 posts

Posted 26 July 2009 - 10:50 AM

I used the Star 140 round midcaps yesterday with no problems.

#10 4ss4ssin

4ss4ssin

    Enthusiast

  • Banned
  • PipPip
  • 50 posts
  • Gender:Male

Posted 01 August 2009 - 03:30 PM

Classic Army Beta C Mag

#11 Guest_camowolf_*

Guest_camowolf_*
  • Guests

Posted 05 September 2009 - 12:37 AM

Socom Gear flat rail adaptors (found on the Echo 1 MTC for reference) fit and match, but rear needs a little modification for the rear upper rail screw to fit. The other two work though, so modification is not needed.

#12 thesmokingman

thesmokingman

    Enthusiast

  • Members
  • PipPip
  • 32 posts

Posted 27 December 2009 - 07:59 AM

Christmas was bound to bring a new compatibility list addition

SOCOM Gear g36/m4 stock adapter fits and works perfectly. I finally got my HK trademarked LE stock onto my g36

#13 ARMC808

ARMC808

    Newbie

  • Members
  • Pip
  • 21 posts
  • Gender:Male
  • Location:Aiea, Hawaii
  • Interests:Watching movies, playing video games with friends, and of course Airsoft!

Posted 02 March 2010 - 09:52 PM

Anyone know what Tightbores fit well in this baby without the need for much modification?

#14 Guest_camowolf_*

Guest_camowolf_*
  • Guests

Posted 02 March 2010 - 10:08 PM

CA Magwell adaptor fits well.

#15 carbonfibreguy

carbonfibreguy

    Newbie

  • Members
  • Pip
  • 8 posts

Posted 11 July 2010 - 04:34 PM

Don't mean to necro, but...

G&P K handguard and outer barrel works. K version.

G&P 3.5x scope works as well.

No modification to fit either of these, but beware that you have to find a new screw and nut if you don't have the G&P ones to mount the scope.

#16 wirelessbrain

wirelessbrain

    Newbie

  • Members
  • Pip
  • 3 posts
  • Gender:Male

Posted 06 August 2010 - 11:25 AM

sorry to necro, but i really want to know if this kit will fir the kg36 http://shop.ehobbyas...extra-long.html
thanks for any help

#17 Guest_allizard_*

Guest_allizard_*
  • Guests

Posted 06 August 2010 - 12:12 PM

It'll work.

#18 wirelessbrain

wirelessbrain

    Newbie

  • Members
  • Pip
  • 3 posts
  • Gender:Male

Posted 06 August 2010 - 12:57 PM

k thanks

#19 crazyman4

crazyman4

    Newbie

  • Members
  • Pip
  • 1 posts

Posted 07 October 2010 - 01:18 PM

Echo 1 Hi-cap mag? How well does it feed and how well does it fit in the magwell?

#20 ChristianZelenuk

ChristianZelenuk

    Newbie

  • Members
  • Pip
  • 12 posts

Posted 06 December 2010 - 09:34 AM

This is a silly question but do KWA m4 mags work with the Private parts magwell conversion?




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users