Hi everybody, I'm new to the forum. first of all, I've bought a KWA 1911A1 2 days ago and I dropped my mag, but the mag is ok, I think, no major scratches and most important, the mag don't leak. ( It did not fall on the mag head, where the bb's poping out) But it's not the problem here, I fired my gun, everythings was fine until I refill my mag, put bb's, put the mag in the gun, and cock the gun..... When I let the slide go forward, to arm the bb in the barrel, most of the time it jam, the slide won't go fully forward, and of cours it won't fire. But without the mag, everytings perfect. ( And sometime it's shoot fine with the mag full of bb's, until it jammed) So I really think it's the piece No.7 who jam the bb between the head of the mag, where the bb start, and the piece 18. When it jam, I cock the gun back and see that the bb is still between the two pieces an not in the cylinder. So I think something just not fully slide the bb in the proper place when it cock forward.
1. I've already tighten the 2 little screws near the spring guide and the special screw no.29 just under the back of the slide.
2. Is it normal that the outer barrel ( part No.3 ) and Part No. 7 are moving alot ? I mean not they can fall of but they are not fixed ?
Can anyone help me ?? Please I'm just clueless, I don't know what to do
Edited by Sgt Jack Carter, 25 August 2010 - 09:17 PM.