Any upcoming M9 PTP proformance upgrades?
Posted 01 June 2010 - 11:03 AM
Posted 01 June 2010 - 09:26 PM
Posted 03 June 2010 - 09:43 PM
Posted 06 November 2010 - 12:23 AM
Posted 07 November 2010 - 10:54 PM
Posted 08 November 2010 - 11:47 AM
an aftermarket part doesn't necessarily work better than the factory part.
Posted 09 November 2010 - 03:13 PM
I know the gun isn't made for it, but would be nice.
Posted 10 November 2010 - 11:36 AM
At most, an EdGI barrel, professionally fitted and your trigger tuned in. Maybe a custom fabricated bearing stainless steel guide rod.
Posted 10 November 2010 - 12:23 PM
Posted 10 November 2010 - 04:01 PM
In fact, short-stroke mods is a poor practice in live firearms too. Without significant slide redesign, I would not recommend it.
All the internals are set to a certain balance, if anything is changed or adjusted, something else needs to be compensated.
Example: When you're adjusting the trigger, take into consideration of the hammer spring. Since the hammer spring judges a good amount of "weight" on double action.
My stock hammer spring clocks a hair over 5lbs and single action is just over 2.5lbs.
Posted 26 December 2010 - 08:40 PM
Posted 26 December 2010 - 08:53 PM
Yes, they do now. All of the KWA GBB pistols (current models) come standard with an high impact polymer outer barrel.
Posted 27 December 2010 - 04:34 PM
Posted 27 December 2010 - 04:35 PM
Thanks for the clarification.
Posted 31 December 2010 - 07:59 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users