Jump to content


Madbull Patriot Kit for KM4 CQB


  • Please log in to reply
12 replies to this topic

#1 GEEBS

GEEBS

    Enthusiast

  • Members
  • PipPip
  • 137 posts
  • Gender:Male
  • Location:Tampa, FL

Posted 03 September 2008 - 11:05 AM

Just picked up a CQB and wanted to know if I will come across any issues with installing the Madbull Patriot kit (short).  As far as the battery is concerned I plan on rewiring to the rear and installing the new Firefox Lipo stick from Airsoft GI into the stock tube.  I know I might have issues with the inner barrel and I'm willing to cut the OEM barrel if needed.  Also, since the barrel will be shorter.. I already know that I will loose accuracy.

Has anyone here had any experience with the Madbull Patriot kit?

#2 Guest_Radix_*

Guest_Radix_*
  • Guests

Posted 03 September 2008 - 07:45 PM

Allizard just showed me his KWA CQB with the Madbull Patriot kit. He uses a 2 piece 7.4V Lipo that fits perfectly in the hand guard. PM him for more detail.

#3 Guest_allizard_*

Guest_allizard_*
  • Guests

Posted 03 September 2008 - 08:01 PM

I have the mid length version thou.  

When you get the short kit. can you please take some picture of the barrel put a ruler next to it.  I like to see how much room there is.  We might be able to make some 7.4v LI-MN that will fit the short kit.

#4 Shmoogly3

Shmoogly3

    Enthusiast

  • Members
  • PipPip
  • 149 posts
  • Gender:Male
  • Location:Wisconsin
  • Interests:Outdoor inthusiest
    Airsofting
    Martial arts
    Cycling
    Hiking
  • Country:

Posted 04 September 2008 - 12:36 PM

Whats your rof with the 7.2v lipo?

#5 Guest_allizard_*

Guest_allizard_*
  • Guests

Posted 05 September 2008 - 02:31 PM

7.4v lipo 15a discharge is 14-15 rounds per second.
11.1v lipo 18a discharge is 24-25 rounds per second.  

This is done with Audacity sound test.

#6 brooklyn468

brooklyn468

    Specialist

  • Members
  • PipPipPip
  • 559 posts

Posted 05 September 2008 - 02:43 PM

View Postallizard, on Sep 5 2008, 05:31 PM, said:

7.4v lipo 15a discharge is 14-15 rounds per second.
11.1v lipo 18a discharge is 24-25 rounds per second.  

This is done with Audacity sound test.

Oh my gosh you use Audacity?!? I love Audacity ! ( It's a free sound - editing software program )

Mine is around 15 a second with an 8.4.

But you could just blame Audacity  :lol:

#7 Guest_allizard_*

Guest_allizard_*
  • Guests

Posted 05 September 2008 - 02:59 PM

yeah... I was using Red Alert 7.4v lipo....

The Apex 7.4v got a better output closer to 17-18.  Then again it's got 2100mah and slightly higher discharge rate as well.

#8 brooklyn468

brooklyn468

    Specialist

  • Members
  • PipPipPip
  • 559 posts

Posted 06 September 2008 - 01:30 PM

View Postallizard, on Sep 5 2008, 05:59 PM, said:

yeah... I was using Red Alert 7.4v lipo....

The Apex 7.4v got a better output closer to 17-18.  Then again it's got 2100mah and slightly higher discharge rate as well.

Makes sence :lol:

#9 karMeister

karMeister

    Guru

  • Members
  • PipPipPipPip
  • 1,534 posts
  • Gender:Male
  • Location:a small hole under a rock =P
  • Interests:EAR=((1+APR/n)^n)-1
  • Country:

Posted 07 September 2008 - 10:05 PM

OT:

I like the Metal Gear solid Partriot look ehehehe

#10 vic_man4

vic_man4

    Specialist

  • Members
  • PipPipPip
  • 591 posts
  • Location:Niagara, Ontario, Canada
  • Interests:Airsoft, XBox 360 (GamerTag = CovertMaz), Cars, and HEAVY METAL \m/

Posted 08 September 2008 - 12:40 PM

View PostkarMeister, on Sep 7 2008, 10:05 PM, said:

OT:

I like the Metal Gear solid Partriot look ehehehe

I deffently perfer Gears of Wars Lancer Assault Rifle and its chainsaw bayonet :lol:

GEEBS, did you get your kit yet, think you could take some pictures and post them up???

#11 brooklyn468

brooklyn468

    Specialist

  • Members
  • PipPipPip
  • 559 posts

Posted 08 September 2008 - 04:00 PM

View Postvic_man4, on Sep 8 2008, 03:40 PM, said:

I deffently perfer Gears of Wars Lancer Assault Rifle and its chainsaw bayonet :lol:

GEEBS, did you get your kit yet, think you could take some pictures and post them up???

When I get the Legendary Edition of Gears 2, I am going to rig the Lancer up to shoot airsoft bbs. I have my buddy's "broken" JG AK (I could fix it) he gave me, and I am going to put it in the Lancer.  :lol:  Anyone know if it is a metal Lancer?

Sorry, I'm off topic. :lol:

I would prefer the JP rifle kit from Madbull. Just a preference :)

#12 GEEBS

GEEBS

    Enthusiast

  • Members
  • PipPip
  • 137 posts
  • Gender:Male
  • Location:Tampa, FL

Posted 16 September 2008 - 06:12 PM

Sorry had to push this project back due to some other obligations.  On top of that, I snapped my sector gear... When I get, I will definitely post pics.

#13 brooklyn468

brooklyn468

    Specialist

  • Members
  • PipPipPip
  • 559 posts

Posted 17 September 2008 - 03:23 PM

View PostGEEBS, on Sep 16 2008, 09:12 PM, said:

Sorry had to push this project back due to some other obligations.  On top of that, I snapped my sector gear... When I get, I will definitely post pics.

Cool, thanks :)




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users