How much improvement of the Inner Barrel..
Posted 25 May 2010 - 08:28 PM
Your was 200mm right? and you bought it from pro shop? I could not find a 200mm length. I mistakely bought a 160mm tb without even looking.
I haven't installed it yet, I need a very small hex wrench. What size was your hex wrench?
Posted 25 May 2010 - 11:45 PM
Posted 27 May 2010 - 04:32 PM
What size is you allen wrench when removing the screw of the bolt release?
Posted 31 May 2010 - 01:47 AM
Posted 31 May 2010 - 05:21 AM
thanx now I can move ahead with installing a longer tightbore that I have been procrastinating precisely because I wasn't sure how to disassembe the mp7.
I think I might install a 220mm (or slightly longer) tightbore and cover it with a barrel extender to maximize range and fps since I use the mp7 as my primary woodland gun.
As far as the size of the hex wrench; acoording to another thread http://www.kwausa.co...?showtopic=1850 a 1mm hex wrench is needed for the fire-selector, bolt-release, etc. VERY small.
Edited by jotohomomoto, 31 May 2010 - 06:02 AM.
Posted 06 June 2010 - 12:46 PM
so my plans for putting in a longer tightbore into my mp7 are starting to materialize. VFC is coming out with a dedicated barrel extender, KWA has that nice thread adaptor, tiger put together that tutuorial and I now have the disposable income to spend on this project. I will probably just get a cheap substiitute barrel extender until the VFC one comes out.
My question is: WHICH kind of inner barrel is compatible with the MP7? I want something longer than the standard 160mm; probably around 220mm but whatever would fit inside the barrel extender nicely.
I'm not sure WHAT the difference is between AEG and gas barrels. I think I read somewhere that the M93 barrel works fine but I'm seeking clarification. Any suggestions would GREATLY appreciated.
Posted 06 June 2010 - 10:35 PM
my MP7 did on a hot summer day.
Edited by Vamp2269, 06 June 2010 - 10:36 PM.
Posted 06 June 2010 - 10:56 PM
Posted 07 June 2010 - 11:35 AM
I did chrono it at a scenario opps game on memorial day that is how I know and that is just the top few shots of a warmed up mag the guys there didnt do a 10 rnd avg. It was very hot out. Oh and it was the first batch I got the gun from ASGI's first shipment.
And Im not bragging I am seriosly worried I wont get to play cqb with it
Posted 08 June 2010 - 04:31 AM
Posted 08 June 2010 - 06:37 AM
Posted 23 June 2010 - 11:24 PM
Posted 29 June 2010 - 05:17 PM
Posted 29 June 2010 - 05:29 PM
Try here. They have .9mm, It's part of a set but it might work.
Posted 29 June 2010 - 05:37 PM
Posted 29 June 2010 - 05:42 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users