How do intstall the EdGI tight bore barrel in a M9 PTP?
Posted 08 March 2010 - 06:56 PM
Posted 09 March 2010 - 10:29 AM
I have done this before but I need to know where you are at.
Once you have the outer barrel sep. from the gun.
If I remember correctly there is like a small spring and a lever (remove)
There is a black pin? Punch that out with some small screwdriver or pushpin w.e
Hop up and inner barrel should come right out
There should be a screw part 334 take that out and then the inner barrel just slowly pull it out from the bucking.
Havent done this in awhile so if anyone else responds correct me it I am wrong
Posted 09 March 2010 - 08:21 PM
Edited by Dirt Bag, 09 March 2010 - 08:27 PM.
Posted 09 March 2010 - 10:07 PM
yea thats what i meant its one of those pins on there and u just punch it out and it only comes out one way.
Posted 09 March 2010 - 11:36 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users