Jump to content


Messed up selector switch


  • Please log in to reply
8 replies to this topic

#1 live

live

    Newbie

  • Members
  • Pip
  • 3 posts
  • Gender:Male
  • Location:Cincinnati Ohio

Posted 24 February 2010 - 03:18 PM

Ok I dropped my KWA M93R NS2 into a puddle of mud in our last event. When I went to take it apart to clean it I did not take a pic of the selector switch. All I took abort was the slide and inside the right grip. When I put it back together it will shoot on full auto. The selector switch drops to three round burst. And when moving the selection lever it does not click into place. I looked at the exploded view in the KWA website and I donít believe anything is missing. If you had this problem and can help me that would be great or of you could show me a picture of the right side of the gun with the grip off so that I can see how it all goes back together that would be great. Thanks. My email is liveairsoft@live.com.

#2 Spiggy

Spiggy

    Member

  • Members
  • PipPipPipPip
  • 2,136 posts
  • Gender:Male
  • Location:City of Industry
  • Country:

Posted 24 February 2010 - 04:42 PM

sure, give me a moment, I'll see if I can get a picture uploaded before evening time.

#3 live

live

    Newbie

  • Members
  • Pip
  • 3 posts
  • Gender:Male
  • Location:Cincinnati Ohio

Posted 25 February 2010 - 09:21 AM

 Spiggy, on 24 February 2010 - 04:42 PM, said:

sure, give me a moment, I'll see if I can get a picture uploaded before evening time.
that helps man

#4 Spiggy

Spiggy

    Member

  • Members
  • PipPipPipPip
  • 2,136 posts
  • Gender:Male
  • Location:City of Industry
  • Country:

Posted 25 February 2010 - 01:22 PM

sorry, I'm kinda preoccupied right now, I'll have it up in about an hour  :blink:

UPDATE!

there ya go, let me know if that helps

Attached Files



#5 live

live

    Newbie

  • Members
  • Pip
  • 3 posts
  • Gender:Male
  • Location:Cincinnati Ohio

Posted 25 February 2010 - 04:28 PM

You went the extra mile man thank you I thought it could be the barring however I dismissed it I did not think I took that apart. Ok well I now know the problem thanks man. now i just need to buy the spring behind the ball on the lever i found the ball.

Edited by live, 25 February 2010 - 04:34 PM.


#6 Spiggy

Spiggy

    Member

  • Members
  • PipPipPipPip
  • 2,136 posts
  • Gender:Male
  • Location:City of Industry
  • Country:

Posted 25 February 2010 - 04:55 PM

No Prob,  Call up the center, we might have that kicking around.

#7 dportch3

dportch3

    Newbie

  • Members
  • Pip
  • 1 posts
  • Country:

Posted 24 June 2011 - 09:27 PM

i took apart my gun and now im missing the spring that pushes the ball bearing up into the fire selector switch... where can i get that spring?

#8 jonayran

jonayran

    Newbie

  • Members
  • Pip
  • 6 posts
  • Country:

Posted 19 April 2012 - 12:05 AM

My spring just fell out today and luckily I found it. Anyone have a guide to put this little spring back in? My selector switch is loose now and only fires full auto ;(

#9 jonayran

jonayran

    Newbie

  • Members
  • Pip
  • 6 posts
  • Country:

Posted 19 April 2012 - 12:20 AM

I'm missing the little tiny ball that goes with the selector switch. Anyone know where I could get this




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users