Jump to content


trigger removal


  • Please log in to reply
7 replies to this topic

#1 andrew5826

andrew5826

    Newbie

  • Members
  • Pip
  • 3 posts
  • Gender:Male
  • Location:Vancover CANADA

Posted 18 February 2010 - 09:44 PM

well im trying to get to the hop up of my mp7 and ive removed everything excrpt the trigger. now ive been told by some ppl that its hard but ive been at it for over 30 mins .is there some special trick or something?

#2 Spiggy

Spiggy

    Member

  • Members
  • PipPipPipPip
  • 2,136 posts
  • Gender:Male
  • Location:City of Industry
  • Country:

Posted 19 February 2010 - 12:03 PM

like I told hibiki, there's no trick.

Before you unpin it, be sure to note which side has the spline.  This pin is a one-way pin.  The spline is the head and should always be the "out."  Think of it like the head on a screw.

wiggle the trigger, it is removed from the guard.

#3 galactica

galactica

    Enthusiast

  • Members
  • PipPip
  • 48 posts
  • Gender:Male
  • Country:

Posted 20 February 2010 - 12:54 PM

Spiggy, when my trigger was removed recently it was found that the trigger bar was in fact bent.  Am I pulling on the trigger too hard?

#4 Spiggy

Spiggy

    Member

  • Members
  • PipPipPipPip
  • 2,136 posts
  • Gender:Male
  • Location:City of Industry
  • Country:

Posted 22 February 2010 - 04:46 PM

do you have a part number[or picture] for me to reference?

#5 galactica

galactica

    Enthusiast

  • Members
  • PipPip
  • 48 posts
  • Gender:Male
  • Country:

Posted 22 February 2010 - 04:54 PM

55, i think.

#6 Spiggy

Spiggy

    Member

  • Members
  • PipPipPipPip
  • 2,136 posts
  • Gender:Male
  • Location:City of Industry
  • Country:

Posted 23 February 2010 - 11:40 AM

did you remove the trigger spring with a punch(not screwdriver) and block or did you employ another method?

#7 galactica

galactica

    Enthusiast

  • Members
  • PipPip
  • 48 posts
  • Gender:Male
  • Country:

Posted 24 February 2010 - 03:11 PM

ah, see, i didn't do it, I don't trust myself.  I think it was punched out.

#8 Spiggy

Spiggy

    Member

  • Members
  • PipPipPipPip
  • 2,136 posts
  • Gender:Male
  • Location:City of Industry
  • Country:

Posted 24 February 2010 - 04:46 PM

:rolleyes: you're gonna have to talk to whoever extracted that pin then.  there's a brass sleeve in the trigger to keep things straight.  If the pin's bent, it was most likely from removal.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users