Jump to content

sr10 motor jamming

motor not shooting locked not firing electrical

  • Please log in to reply
No replies to this topic

#1 myakup07



  • Members
  • Pip
  • 3 posts
  • Country:

Posted 31 August 2014 - 02:22 PM

Ive been combating an issue and losing. My sr10 worked fine until I put a new kwa m130 spring in. Now it seems like my motor isn't spinning my gears. There is no clicking sound but I can feel the motor trying to spin in the pistol grip. The motor also spins fine when I remove it from the pistol grip. I believe the problem is within the gear contact with the motor. I took the gearbox apart relubed the gears and put it back together. I did notice the bevel gears bearing comes lose easily and am afraid it is effecting the gears. playing with the motor height solved the problem right now but im afraid it will come back. I had gearbox lock ups when I installed a systema 130 now its back with the kwa 130. also, my air nozzle always is in the locked backed position. it cycles fine but always locks back after shooting semi. do I need a new bearing? a new motor? maybe a shim job?

thanks in advance for any help

Edited by myakup07, 31 August 2014 - 02:24 PM.

Also tagged with one or more of these keywords: motor, not shooting, locked, not firing, electrical

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users