Jump to content


rof for sr10

rof. sr10

  • Please log in to reply
26 replies to this topic

#1 sr10dude

sr10dude

    Newbie

  • Members
  • Pip
  • 17 posts
  • Gender:Male
  • Location:Allentown Pennsylvania
  • Interests:Basketball . football. Airsoft
  • Country:

Posted 14 August 2014 - 08:41 PM

I have a kwa sr10 and I am pretty satisfied with the fps and I know it will drop a little when rof gets better. What parts do I need for the rof and is there parts I have to get to stop the chance of something breaking

Thank you everybody for reading.

PS. I want to achieve 30-35 rof.

#2 Chuck S

Chuck S

    Guru

  • Members
  • PipPipPipPip
  • 1,304 posts
  • Gender:Male
  • Location:Cleveland, Ohio
  • Country:

Posted 15 August 2014 - 02:28 AM

Cyclic rate is largly determined by battery voltage.

The rate you're looking for is the defination of "spray and pray" and is twice to three times the rate of my KM4 with an 11.1v LiPO battery and a stock, fairly lightweigt spring.

-- Chuck

#3 BLATEY

BLATEY

    Enthusiast

  • Members
  • PipPip
  • 201 posts
  • Gender:Male
  • Location:Iowa City, Iowa
  • Interests:Keepin' it Real.
  • Country:

Posted 15 August 2014 - 04:23 AM

What battery are you using dude?

#4 Larry

Larry

    Enthusiast

  • Members
  • PipPip
  • 112 posts
  • Gender:Male
  • Location:Atlanta
  • Country:

Posted 15 August 2014 - 07:54 AM

Most techs wont guaranty builds like that, most break sooner than later later. The list would be long on parts. I have a SR10 (stock gear box) a 11.1 and a JBU high torque. It runs at  23 rps at 397fps, goes thru midcaps fast enough. Been running like that for 7 months so far.

#5 sr10dude

sr10dude

    Newbie

  • Members
  • Pip
  • 17 posts
  • Gender:Male
  • Location:Allentown Pennsylvania
  • Interests:Basketball . football. Airsoft
  • Country:

Posted 15 August 2014 - 08:28 AM

I have it completely stock. I bought the gun from someone else and they told me that it had tight bore barrel. I'm using a 9.6 1600 mah..

I want everything to improve a decent amount I have alot of money saved. What are parts I should buy.

I want accuracy and rof. If you have parts listing that would be lovely Thanks everyone. First time on this forum. Everyone is helpful


#6 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,595 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 15 August 2014 - 02:43 PM

View Postsr10dude, on 15 August 2014 - 08:28 AM, said:

I have it completely stock. I bought the gun from someone else and they told me that it had tight bore barrel. I'm using a 9.6 1600 mah..

I want everything to improve a decent amount I have alot of money saved. What are parts I should buy.

I want accuracy and rof. If you have parts listing that would be lovely Thanks everyone. First time on this forum. Everyone is helpful
If you let us know what ROF you are looking for at say....400FPS with .2's we can help you more.

#7 sr10dude

sr10dude

    Newbie

  • Members
  • Pip
  • 17 posts
  • Gender:Male
  • Location:Allentown Pennsylvania
  • Interests:Basketball . football. Airsoft
  • Country:

Posted 15 August 2014 - 02:48 PM

My apologies I am really looking for range and rof with accruacy.

I would like to be at 420 fps with .20 g. And have a 26 or so rof. With a better distance and accuracy.

#8 Chuck S

Chuck S

    Guru

  • Members
  • PipPipPipPip
  • 1,304 posts
  • Gender:Male
  • Location:Cleveland, Ohio
  • Country:

Posted 15 August 2014 - 04:04 PM

I'm curious why you want such a fast cyclic rate.  "Just 'cuz" is reason enough but it's completely un-realistic if you're pretending airsoft is some sort of combat simulation.  (Use 30 round magazines and cut the cyclic to about 700 rpm and it starts to get realistic.)

But, as I wrote, "just 'cuz" works.  :)
-- Chuck

#9 sr10dude

sr10dude

    Newbie

  • Members
  • Pip
  • 17 posts
  • Gender:Male
  • Location:Allentown Pennsylvania
  • Interests:Basketball . football. Airsoft
  • Country:

Posted 15 August 2014 - 04:36 PM

Rof isn't the big thing I really want accuracy and range. And yea aha 30 rps would be sweet! So kinda just cuz

#10 Larry

Larry

    Enthusiast

  • Members
  • PipPip
  • 112 posts
  • Gender:Male
  • Location:Atlanta
  • Country:

Posted 16 August 2014 - 06:30 AM

I use a G&G green bucking flat hopped with a maple leaf flat nub, in a Madbull 455mm 6.03 barrel. Can outrange most guns at the feild that stay under the 400 fps rule. Have the stock barrel group (425mm) set up that same way and is also very long.  Accuracy at 225 to 240ft outdoors hard to judge, wind ect.

Edited by Larry, 16 August 2014 - 06:31 AM.


#11 BLATEY

BLATEY

    Enthusiast

  • Members
  • PipPip
  • 201 posts
  • Gender:Male
  • Location:Iowa City, Iowa
  • Interests:Keepin' it Real.
  • Country:

Posted 16 August 2014 - 07:25 AM

I have a a&k SR-25( sorry for non kwa product) that I just got r hopped, and it's shooting 300 feet at a man sized target hitting at about every other shot give or take a few shots. Madbull black python barrel and r hop only in this gun.

I'd recommend r hop and madbull barrel.

#12 Pyro_Buster

Pyro_Buster

    Enthusiast

  • Members
  • PipPip
  • 123 posts
  • Gender:Male
  • Location:California
  • Country:

Posted 16 August 2014 - 07:57 AM

I have a Maple Leaf 70 and RTX flat hop with a Madbull 6.03 in my SR10, and I was hitting a man sized target at 275' every shot even with the 12 mph or so crosswind. This was with EF .32 Milsim Max btw.

#13 BLATEY

BLATEY

    Enthusiast

  • Members
  • PipPip
  • 201 posts
  • Gender:Male
  • Location:Iowa City, Iowa
  • Interests:Keepin' it Real.
  • Country:

Posted 16 August 2014 - 08:19 AM

Forgot to add I was using using devil .3g bb, I too have cross wind of about 10-15 mph of wind.

#14 Larry

Larry

    Enthusiast

  • Members
  • PipPip
  • 112 posts
  • Gender:Male
  • Location:Atlanta
  • Country:

Posted 16 August 2014 - 09:54 AM

View PostPyro_Buster, on 16 August 2014 - 07:57 AM, said:

I have a Maple Leaf 70° and RTX flat hop with a Madbull 6.03 in my SR10, and I was hitting a man sized target at 275' every shot even with the 12 mph or so crosswind. This was with EF .32 Milsim Max btw.

View PostBLATEY, on 16 August 2014 - 08:19 AM, said:

Forgot to add I was using using devil .3g bb, I too have cross wind of about 10-15 mph of wind.


    What FPS were the guns running.

#15 Pyro_Buster

Pyro_Buster

    Enthusiast

  • Members
  • PipPip
  • 123 posts
  • Gender:Male
  • Location:California
  • Country:

Posted 16 August 2014 - 10:44 AM

View PostLarry, on 16 August 2014 - 09:54 AM, said:

    What FPS were the guns running.

Around 420-430 with .20's and the hop up all the way off.

#16 BLATEY

BLATEY

    Enthusiast

  • Members
  • PipPip
  • 201 posts
  • Gender:Male
  • Location:Iowa City, Iowa
  • Interests:Keepin' it Real.
  • Country:

Posted 16 August 2014 - 12:25 PM

View PostPyro_Buster, on 16 August 2014 - 10:44 AM, said:



Around 420-430 with .20's and the hop up all the way off.
Same too.
I believe you should work from front to back of the gun IMO. Hop up and barrel, as front, then work on gearbox as back of the gun.

#17 sr10dude

sr10dude

    Newbie

  • Members
  • Pip
  • 17 posts
  • Gender:Male
  • Location:Allentown Pennsylvania
  • Interests:Basketball . football. Airsoft
  • Country:

Posted 16 August 2014 - 01:33 PM

So what parts should I buy? If you can send links would be lovely

#18 Pyro_Buster

Pyro_Buster

    Enthusiast

  • Members
  • PipPip
  • 123 posts
  • Gender:Male
  • Location:California
  • Country:

Posted 16 August 2014 - 09:54 PM

View Postsr10dude, on 16 August 2014 - 01:33 PM, said:

So what parts should I buy? If you can send links would be lovely

Barrel
http://www.evike.com/products/24374/

Bucking
http://m.ebay.com/it...r-/121173631117

Spring
http://www.evike.com/products/31457/

Cylinder
http://www.evike.com/products/44782/

If you do go with the Maple Leaf bucking, make absolutely sure it's the one with the nub (hence my eBay link). Sometimes they don't come with the nub and the performance is subpar.

#19 sr10dude

sr10dude

    Newbie

  • Members
  • Pip
  • 17 posts
  • Gender:Male
  • Location:Allentown Pennsylvania
  • Interests:Basketball . football. Airsoft
  • Country:

Posted 17 August 2014 - 10:05 AM

View PostPyro_Buster, on 16 August 2014 - 09:54 PM, said:



Barrel
http://www.evike.com/products/24374/

Bucking
http://m.ebay.com/it...r-/121173631117

Spring
http://www.evike.com/products/31457/

Cylinder
http://www.evike.com/products/44782/

If you do go with the Maple Leaf bucking, make absolutely sure it's the one with the nub (hence my eBay link). Sometimes they don't come with the nub and the performance is subpar.

So this is all I need nothing else. And what kind of performance would I get like what would improve.

Thank you very much

#20 Pyro_Buster

Pyro_Buster

    Enthusiast

  • Members
  • PipPip
  • 123 posts
  • Gender:Male
  • Location:California
  • Country:

Posted 17 August 2014 - 11:20 AM

The performance I have is with all of the listed items except the cylinder. The cylinder would increase your distance.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users