Jump to content


LM4 with AEG Inner Barrel


  • Please log in to reply
5 replies to this topic

#1 Shaggy

Shaggy

    Enthusiast

  • Members
  • PipPip
  • 55 posts
  • Gender:Male
  • Country:

Posted 09 August 2014 - 09:39 PM

What's up here is my LM4 with a SR-12 aeg inner barrel with the hop up window is cut for an IER Hop

Posted Image

I used my dremel to cut the notches for the LM4 stock c clip and the other for the e clip mod
Posted Image

I cut the hop up bucking down to fit
Posted Image

I used a drill bit and drilled out these 3 pieces to fit over the inner barrel
Posted Image

This is how everything fit
Posted Image

I took a drill bit and drilled the inner lip so the hop up would slide to where the stock hop up sits
Posted Image

Posted Image

Everything fits just like stock
Posted Image

Everything feeds great no jams no double feeds have to do more testing to see range and fps but it works
Posted Image

#2 BoobieM4H

BoobieM4H

    Guru

  • Members
  • PipPipPipPip
  • 1,069 posts
  • Gender:Male
  • Location:SAN JOSE, CA
  • Interests:IF IT USES GREEN GAS..I MAKE IT SHOOT BETTER!
  • Country:

Posted 09 August 2014 - 09:42 PM

No tensioner arm? What are you using in place of it?

#3 Shaggy

Shaggy

    Enthusiast

  • Members
  • PipPip
  • 55 posts
  • Gender:Male
  • Country:

Posted 09 August 2014 - 09:53 PM

Sense I'm using the r-hop a couple raps of teflon tape seems to be all that I need the aeg bucking is around the same outer diameter as the stock bucking and sleeve

#4 BeachEMT

BeachEMT

    Specialist

  • Members
  • PipPipPip
  • 533 posts
  • Gender:Male
  • Location:People's Republic of California
  • Interests:Engineering, Emergency Medicine
  • Country:

Posted 10 August 2014 - 09:25 AM

So in essence you are just using it as a non-adjustable hop-up? I'm interested to see how you range and accuracy turn out. Also interested in your FPS numbers. I've always wondered how well an AEG bucking would seal with the LM4 nozzle.

#5 Shaggy

Shaggy

    Enthusiast

  • Members
  • PipPip
  • 55 posts
  • Gender:Male
  • Country:

Posted 10 August 2014 - 09:47 AM

Yes it will be non adjustable hop up when it's done but I don't think it would be hard to make it an adjustable hop up I will experiment        
with different bucking's to see what one gives the best seal

#6 Shaggy

Shaggy

    Enthusiast

  • Members
  • PipPip
  • 55 posts
  • Gender:Male
  • Country:

Posted 14 August 2014 - 08:09 AM

Using Bioval .30g bbs I did grind the rocket valve to give me a higher FPS this is with the maple leaf evo II hop up turned off
Posted Image

Posted Image

Posted Image

Posted Image

This is with the aeg inner barrel and G&G green bucking
Posted Image

Posted Image

Posted Image

Posted Image

Posted Image




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users