SR10 Feeding Issues
Posted 31 July 2014 - 06:34 AM
I got it about 3 months ago and since day 1 have had inconsistent feeding. I've taken the bucking out and washed it with soapy water. I thought it was my Pmags since they are old and I purchased a new set of the KWA midcaps thinking that would help. Unfortunately it still misfeeds. At this point I'm out of ideas on how to fix this. Ive put probably 10k rounds through it so I should be past the break in point.
Posted 01 August 2014 - 05:09 AM
Welcome to the KWA forums.
First, can you check to see if pushing the mag up at the base towards the gun while firing resolves the issue? If so it may be that your mag catch is loose and simply needs to be tightened.
Second, if you have been using spray silicone in your hop up (which you should NEVER do) your bucking could have swelled causing jams in the bucking. You may also want to change the bucking out.
Other possibility can be that your bb feed ramp is not seated correctly or may have some micro burrs from the molding process that can hinder proper feeding. At worst case scenario the bb ramp should be changed to see if it will resolve your feeding issues. I know that your gun is outside the 45 day warranty period but you may want to contact KWA warranty service via "helpdesk" and I am sure they will be able to help you.
Posted 05 October 2014 - 08:02 PM
Posted 05 October 2014 - 09:55 PM
Posted 05 October 2014 - 10:15 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users