Jump to content


Umarex.....


  • Please log in to reply
6 replies to this topic

#1 ChaosMP7

ChaosMP7

    Newbie

  • Members
  • Pip
  • 26 posts
  • Country:

Posted 10 July 2014 - 12:15 PM

So I'm just trying to figure out some info on the two systems the mp7 has had as far as pushing the nub inside the bucking down. Ball bearing vs plunger, just to know if the bucking that come with ball bearings will work for 100%. So I asked umarex, this is what I got in return "Unfortunately that is not a model that we repair and I would not have repair information about it."  Know I understand that kwa is the one that makes it, I just don't get why umarex took kwa off and asks for us to contact umarex for support when this is what they say.

#2 Chuck S

Chuck S

    Guru

  • Members
  • PipPipPipPip
  • 1,311 posts
  • Gender:Male
  • Location:Cleveland, Ohio
  • Country:

Posted 10 July 2014 - 06:12 PM

What's the serial number on the gun?  Some of these are KWA and some Umarex.  They're identical other than the markings and who warrants them.  All made by KWA.

Here's the Umarex markings.  If yours are different contact KWA for repair.

Posted Image

-- Chuck

#3 ChaosMP7

ChaosMP7

    Newbie

  • Members
  • Pip
  • 26 posts
  • Country:

Posted 11 July 2014 - 05:51 AM

my gun is set up weird as far as markings. the only place that has numbers is the plate near the stock. it just has h@K gbmh and then on the other side it has the actually round size for the real gun. at the plate with the S/N it has 6mm.

#4 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,604 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 11 July 2014 - 02:22 PM

Can you post a picture of the right side above the trigger please?

#5 ChaosMP7

ChaosMP7

    Newbie

  • Members
  • Pip
  • 26 posts
  • Country:

Posted 12 July 2014 - 02:16 PM

Attached File  image.jpg   119.42K   8 downloads

The other side above the trigger says CAL.4.6mmx30

#6 Chuck S

Chuck S

    Guru

  • Members
  • PipPipPipPip
  • 1,311 posts
  • Gender:Male
  • Location:Cleveland, Ohio
  • Country:

Posted 13 July 2014 - 02:30 AM

Mine came with a one year warranty.  Yours?  Are in USA?  Was the gun purchased in USA?  From whom?

Both sides of my KWA-made Umarex-marketed MP7A1:

Posted Image

Posted Image

And just so there's no doubtit's a Umarex!  :)

Posted Image

-- Chuck

#7 ChaosMP7

ChaosMP7

    Newbie

  • Members
  • Pip
  • 26 posts
  • Country:

Posted 13 July 2014 - 04:03 AM

Got mine from gcb airsoft here in NC, also came with a one year. I'd post more pictures but it says I've reached my limit on uploads.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users