Bolt and Charging handle "Dragging"
Posted 27 April 2014 - 05:09 PM
It doesn't seem to affect it much as far as normally running when the charging handle is latched forward but it does seem to have less recoil than when I bought it. And when I first got it this wasn't even an issue everything moved around freely and smoothly?
The lubrication I am using is a spray Silicone branded by Classic Army that my local Airsoft Shop carries. Not sure if that makes a difference or not.
Thanks for any help
Posted 27 April 2014 - 06:30 PM
Posted 27 April 2014 - 07:33 PM
Apparently you can torque certain optics down tight enough to actually slightly take away the clearance in the channel that the charging hand runs in. Go figure.
I have a Clone ACOG on top to replicate the ACOG on my real AR and I cinched it down IAW the specs for the real one. That's what was causing my issues. All fixed now. But you can actually tighten it down enough by hand to do this. I basically have it snug instead of tight. Will probably add a drop of blue Loctite to it to keep it from backing off over time.
THanks for the recomendations on the lube by the way. I'll pick some up.
Posted 29 April 2014 - 08:51 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users