ATP Auto Gas Dumpgetting.. frustrated...
Posted 12 April 2014 - 11:02 PM
purchased about 1 month ago... light use...
first issue was the trigger gets stuck, along with the slide. unable to rack it. it was pretty stuck so in the end i used a rubber hammer to tap it back forward... at which point i disassembled the gun.
solved this problem by replacing the hammer assembly housing
now after i reassembled it, when i fire it, the slide cycles but doesnt return to normal position, but instead it stops a couple mm behind normal position and spews out all the gas.
i checked and rechecked all the internal parts and everything looks fine... so now im here scratching my head...
any ideas or tips would be greatly appreciated....
sad to say this is probably the LAST KWA product i will ever buy... sorry guys
Posted 13 April 2014 - 06:39 AM
I month old, warr? I bought a Top Teck recently, motor died next day. Happens, they replaced motor at the store next day. Guns right up their with my KWA, almost
Posted 21 May 2014 - 09:09 AM
I was having this issue and it turned out that the gun doesn't like the cheap airsplat gas.
It was acting up again this weekend, firing one shot then dumping all the gas. Was using KWA gas this time. Lubed all the valves with oil. No problem. I guess the valves were sticking.
videos after I lubed it.
Also, make sure you lube the outside of the seal #MG12
Posted 03 July 2014 - 03:37 PM
Hi litemeupairsoft - Welcome to the KWA Forums - While we appreciate your enthusiasm regarding your review of the ATP Auto please start a new thread here: http://www.kwausa.co...howforum=44. I am deleting your multiple posts.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users