KM4 ris feeding issue
Posted 03 April 2014 - 02:17 PM
As my first post on this forum, this is a real tricky one for me and I'm totally stuck.
So lets see,
I have a KWAm4 ris and a kwa m4 s system, I opened up the RIS to change the spring because of fps limits in my country.
Now ever since i reassembled it, it has feeding issues. it ALWAYS feeds the first BB, all blank shots after that, if I reinsert the mag, it fires just the first one again.
Also when I give the mag a good slap, it sometimes fires another bb.
When I pull back the mag with a reasonable amount of force I hear a spring making some kind of noise, and the gun feeds.
so my guess is that the problem lies here somewhere.
- Its not the mags, I have 3 brands that feed the S system and fed the RIS before
- Its probably not the hop up, when I swap the barrel and hop unit with the SS, same problem
- its not the ammo
- its probably not the nozzle, it moves as it should ( even compared it to the SS)
- I can also be pretty sure its not the battery
I have searched the forum a bit but didnt really find anything, so you guys please... help me!
Posted 04 April 2014 - 12:42 PM
Almost too stupid to be true
The screw in my stock tube was too tight so it moved the gearbox a little that in its turn moved the bottom hop up piece a little which didnt allow the bbs to fully pass trough...
Posted 04 April 2014 - 01:02 PM
I've only recently started to work on my guns,
decided to buy a defect one to actually start learning to do my own stuff
discovered a new aspect about this hobby and im totally loving it, and loving KWA!
It's like solving puzzles
Posted 04 April 2014 - 01:27 PM
Posted 04 April 2014 - 01:35 PM
Gonna take me a while before I start doing that
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users