Posted 26 January 2014 - 12:10 PM
Will finding a low-pro gas block to fit the stock outer barrel be problematic? Will the Madbull/Noveske work?
Will the Daniel Defense Mk18 9.5" RIS be a simple fit?
Are there any other obstacles in the way?
Thanks in advance for any help!
Posted 26 January 2014 - 02:15 PM
Yes, the DD should be as easy as 1 2 3, if you know what mean, if you need help there are many vids on the interweb
Posted 26 January 2014 - 08:38 PM
I'm very aware that the gas block, who's sole purpose is the re-direction of propellant gasses is not functional on a gun that is powered by an electronically driven piston. My question is which would be suitable for an accurate replica?
Thanks for the info on the RIS, though.
Posted 26 January 2014 - 09:02 PM
I'm planning on using the stock outer barrel, a gas block, and a Madbull Daniel Defense 9.5" Mk18 in DE or Black to complete this build.
Posted 27 January 2014 - 02:35 PM
It's currently out of stock, but I think you can find it on ebay for less.
I know for a fact that this one works.
here it is on my KWA RIS outer barrel.
Edited by choochoo, 28 January 2014 - 02:40 PM.
Posted 27 January 2014 - 03:55 PM
Im converting a KWA MOD2 into a MK18 MOD 0
Posted 29 January 2014 - 03:24 PM
Ok, part of the issue is going to be the fact that the DD rail is not drilled for a fake gas tube. And because of the profile of the SR7's outer barrel, and DD rail, your best bet might be to:
- Drill a hole in the DD rail for the existing gas tube
- Cut down the tower/gas-block and refinish it to look like a low profile gas-block. When done properly it is a great look
Keep in mind that would require sourcing the proper outer barrel and gas-block. The place to start would be Madbull airsoft. Here is what a low profile for you SR7 barrel looks like and can be made by cutting down the tower. Follow link: http://madbull.com/c...age.196x147.jpg
PS - I can find no definitive image on the MK18 gas block. But from what I do know this would be very close: http://www.airsoftgi...roducts_id=6486
Again this would need the appropriate new outer barrel.
Posted 06 November 2014 - 12:15 PM
Also tagged with one or more of these keywords: Mk18, Sr7, KWA, KM4
AEG Technical Forums →
Downgrades & Modifications →
GBB Pistols Technical Forums →
Community Forums →
Community General Chat →
AEG Technical Forums →
KM4/KM16/CQR Series →
GBB Rifle Technical Forum →
LM4 Series →
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users