Jump to content


How to remove the KWA sr-10 outerbarrel


  • Please log in to reply
1 reply to this topic

#1 Brent Albaran

Brent Albaran

    Newbie

  • Members
  • Pip
  • 1 posts
  • Country:

Posted 20 November 2013 - 11:35 PM

Hey so ive had my sr-10 for a long itime and it was time to change the rail system. I took out the railsystem with ease but now, the big nut that screws in the rail is stuck behind the delta ring. I can easiy take out the delta ring if it wasnt for the gastube and gas block! i cant twist the delta ring off since the gastube is in the way! so how do i take out the gastube and gasblock that is attatched to the outerbarrel> oh on another note, can the stock sr10 barrel unscrew to make it shorter?

#2 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,304 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 21 November 2013 - 05:07 PM

Hi Brent - Welcome to the KWA Forums.  Have a look at the video in post #1 of this thread.  This should give you the info you need.

http://www.kwausa.co...?showtopic=1533

Hope this helps.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users