Jump to content


tools needed for disassembly? (MP7)


  • Please log in to reply
3 replies to this topic

#1 ambexplicit

ambexplicit

    Newbie

  • Members
  • Pip
  • 1 posts
  • Country:

Posted 07 November 2013 - 06:06 AM

So i have an extended 6.03 tbb from Falcon and a [barrel extension] to cover it up. I cant seem to find what hex key will fit the safety selector and bolt catch lever to remove them. Anybody know what size tool is needed? Ive heard 1.3mm and 1mm, but i just want to be completely sure and hear it from someone with experience. Thanks in advance!

#2 SR105

SR105

    Tech

  • KWA Staff
  • PipPip
  • 166 posts
  • Gender:Male
  • Location:Walnut, CA
  • Country:

Posted 07 November 2013 - 03:02 PM

In order to get down to the inner barrel you will need the following:

0.9mm allen wrench for the set screws in the fire selector and bolt release
1.5mm allen wrench for a few set screws that hold the barrel assembly to the main receiver
a punch. i usually use a 1/16 to punch out the trigger pin and another pin that holds the barrel onto the receiver

That should do it.

#3 kwaispro727

kwaispro727

    Specialist

  • Members
  • PipPipPip
  • 970 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Fishing, swimming, airsoft, real firearms, cars
  • Country:

Posted 12 November 2013 - 07:59 AM

You can get .9mm allen keys on amazon for like 70 cents.  I got two in case I bend one because they're really thin and easy to lose.  I suggest keeping them in any case or holder that comes with them.

#4 mikeeitup

mikeeitup

    Newbie

  • Members
  • Pip
  • 9 posts
  • Gender:Male
  • Country:

Posted 20 November 2013 - 02:53 PM

Hey guys I guess I bought a cheap set because my .9 didn't work so I bought a good .89mm allen key per suggestion of a guy who does it on youtube. Guess you can't cheap out on that eh?
Mike




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users