Weird issues on LM4 PTS
Posted 10 May 2013 - 12:21 AM
When I put the gun on full auto and try to mag dump, I can't get through the mag without the gun randomly stopping. Then I switch it to semi and it leaks a tiny bit of gas out the barrel. The Bb kind pops out and lands 10 ft in front of me then gun does a full cycle and the same thing happens when I put the trigger in semi. So its leaking a little gas out, then firing and it keeps doing it. If I rack the bolt back with my finger on the trigger, the bolt fires back like normal.
Only mods were the Bolt catch mod, and ramping the nozzle area on the BCG to keep the air nozzle from ever locking forward.
I was thinking it might be a mag/valve problem and a little lube might help it. But I don't have a second mag to confirm it is the mag and not the hammer.
Let me know what you guys think. Btw, any one got extra Green oring from harbor? I would like to install it to maybe fix any gas leaks.
I'll try to get a video up tomorrow.
Posted 10 May 2013 - 12:42 AM
Posted 10 May 2013 - 08:21 AM
I'll clean it out and be less liberal with lube. I don't think the nozzle is getting stuck forward. I made sure it wouldn't. Hopefully its just lube then.
Posted 10 May 2013 - 03:05 PM
Posted 10 May 2013 - 08:11 PM
made the cycling of the bolt more efficient because before the mod I would occasionally get a run away bb; bb that dislodged from the hop-up and would roll out the end of the barrel if it was pointed towards the ground.
Posted from my iPhone
Posted 12 May 2013 - 07:21 AM
( o Y o )
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users