Sliding not locking forward when mag empty
Posted 29 April 2013 - 11:09 PM
Basically as per the title. When the mag is empty the my m11 usually dry fires. If I fire a few rounds in semi it usually changes its mind and the bolt locks forward.
Posted 30 April 2013 - 11:36 AM
Posted 30 April 2013 - 01:08 PM
I've stripped the gun down and one of the cylinder return springs is damaged and also 2 of the breech base screwed are missing. I can't see anything else wrong
Do kwa parts store ship to the uk?
I can't find anyone in the uk that supplies kwa parts just guns and mags.
If I did place an order are there any other parts that are worth getting as spares for the future?
Posted 30 April 2013 - 05:58 PM
- Green cylinder head = 15m cylinder
- Orange cylinder head = 14mm cylinder
Hope this helps.
Posted 30 April 2013 - 08:07 PM
I had this same problem about 8 to 10 months ago.
Not knowing how to work on my own gun at the time I sent it in to KWA.
They replaced my #4 Cylinder. The nub on the bottom that pushes the BB out of the magazine was very worn.
It should be square and blunt.
They also replaced the #134 Magazine Lip on my magazine.
Since then I have not had this happen again, at all.
I always keep at least 3-#83 Cylinder Return Springs in my supplies. I check them often.
Also since I have learned how to work on my gun I have noticed that the #95,96 and 97 screws do not stay tight. I check them often too.
Hope this helps.
Posted 30 April 2013 - 09:15 PM
Is it the cylinder that can be damaged from inserting the mag without cocking it first?
Posted 30 April 2013 - 11:37 PM
Posted 01 May 2013 - 06:37 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users