Jump to content


KM16 BR Feeding issues


  • Please log in to reply
3 replies to this topic

#1 acalinao

acalinao

    Newbie

  • Members
  • Pip
  • 3 posts
  • Country:

Posted 09 April 2013 - 10:04 AM

I have a KM16BR that will not feed at all. I have replaced the following parts with KWA stock parts and still nothing.
1. new hop up and 2gx bucking
2. m130 spring
3. air nozzle
4. cylinder head
5. tappet plate.
6. wiring harness

I use King Arms Plat .25s bbs. in 2 different KWA hi cap mags. Both mags feed perfectly in my sr10.
Battery used is a 11.1 v, 2200mah 15c , zippy max lipo. battery works fine in my sr10.

Any and all input is greatly appreciated. All parts listed above are new KWA stock parts.

Thanks

#2 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,654 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 09 April 2013 - 03:47 PM

Bet the feed ramp is damaged or out of alignment.  Try re-seating it and see if that helps.  Also, is the mag catch worn.  That can cause issues if it is.

#3 acalinao

acalinao

    Newbie

  • Members
  • Pip
  • 3 posts
  • Country:

Posted 10 April 2013 - 12:59 PM

i'll check them. thanks for the feedback.

#4 acalinao

acalinao

    Newbie

  • Members
  • Pip
  • 3 posts
  • Country:

Posted 14 April 2013 - 04:03 PM

I have tried all of the above and still nothing... I pulled the bb ramp out of my functioning SR10 and the mag catch is like new. This is very puzzling. I will try a few different mags and will reset the hop up and bucking... Any other ideas. All are welcome.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users