Jump to content


Problem with re-assembly! Help!


  • Please log in to reply
4 replies to this topic

#1 kwaispro727

kwaispro727

    Specialist

  • Members
  • PipPipPip
  • 945 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Fishing, swimming, airsoft, real firearms, cars
  • Country:

Posted 25 March 2013 - 02:15 PM

I was changing the inner barrel and these four pieces fell out!  The spring on the left and big piece appear to go on the side there. (for the bolt catch I'm guessing?)  But what about the spring and tiny little black piece on the right?  I can't figure out where they go.

Also, you know how the hop-up clicks when you turn it?  Mine doesn't any more.  It seems to work fine, but just no clicking noise.  Good? Bad?Posted Image

I really want to get this thing back together and try it out lol :)

#2 BENboBEN

BENboBEN

    Specialist

  • Members
  • PipPipPip
  • 318 posts
  • Gender:Male
  • Location:Sparta, MI
  • Interests:Working on my guns. Ford. NASCAR. Metallica. Collecting Zippos. Airbrushing guns and anything else that can be.
  • Country:

Posted 25 March 2013 - 02:32 PM

I believe that those two unknowns are what make the hop up click. I cant remember though because it was a while ago. I had the same problem, no clicking, put those parts in, cant remember where, but it worked.

#3 kwaispro727

kwaispro727

    Specialist

  • Members
  • PipPipPip
  • 945 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Fishing, swimming, airsoft, real firearms, cars
  • Country:

Posted 25 March 2013 - 02:42 PM

Oh ok.  That shouldn't be too hard to figure out.  I was concerned they were from somewhere else more important.

#4 BENboBEN

BENboBEN

    Specialist

  • Members
  • PipPipPip
  • 318 posts
  • Gender:Male
  • Location:Sparta, MI
  • Interests:Working on my guns. Ford. NASCAR. Metallica. Collecting Zippos. Airbrushing guns and anything else that can be.
  • Country:

Posted 25 March 2013 - 04:04 PM

Ahh, i remember, let's see if I can explain it. Alrighty, so when you remove the stick that the adjustment tool goes into, underneath the disk part at the end of the stick there are notches. The spring and other thing go in the gas block and click with those notches. That might make sense.

#5 kwaispro727

kwaispro727

    Specialist

  • Members
  • PipPipPip
  • 945 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Fishing, swimming, airsoft, real firearms, cars
  • Country:

Posted 25 March 2013 - 04:16 PM

I got it.  Thanks.

Edited by kwaispro727, 25 March 2013 - 05:42 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users