Jump to content


I'm about to smash my m9 ptp if I don't get any help


  • Please log in to reply
9 replies to this topic

#1 Acelafan123

Acelafan123

    Enthusiast

  • Members
  • PipPip
  • 33 posts
  • Country:

Posted 08 December 2012 - 05:46 AM

I'm sick of kwa's crap, my m93r had to go into warranty repair 3 times. 3 TIMES! I paid $210 for the package deal. I had the gun in warranty repair a total of 3 months. I sold it after the 3rd warranty repair. Now I bought an m9 ptp and it's only been giving me problems. I had the trigger spring break 2 times and now the bucking is so swollen the bb gets jammed. I've taken the hop apart, soaked the bucking and I need help getting it back together. Anybody want to point me to a guide on how to do it before I smash it? I work minimum wage, I'm 15. It's so hard to focus all your time and money on one thing just to have it causing more stress the fun. Honestly, if I don't get help by the end of the day I'm making a video of me smashing it. Engineered to out perform? Really?

#2 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 08 December 2012 - 06:15 AM

Don't smash your M9. That would not be good. Sorry for all the trouble you've been experiencing. Your trigger return spring broke twice already? Are you pulling the trigger and dry firing your gun just for fun? Or are you actually only pulling the trigger when shooting? I'm not sure how to put the inner barrel components back together. I once replaced my cracked barrel with a new one and it was difficult to put that back together without cracking the new barrel. I know, words you don't want to hear right now. I would say take deep breaths... literally. Wait a day or so, put it off to the side, and pick the parts back up with a fresh, relaxed mind. Then with that, slowly reassemble in the way you took the parts out. Think carefully which clip would go onto the hop up bucking    at what time. Screwing in the bb ramp would probably be your last step. I'm going to look at a parts diagram and get back to you.

#3 Acelafan123

Acelafan123

    Enthusiast

  • Members
  • PipPip
  • 33 posts
  • Country:

Posted 08 December 2012 - 07:01 AM

Sorry about the hostile post. I know I won't get much help like that. Is there any guide for hop up assembly that is similar to the m9 ptp tactical? I have the whole hop up assembled like it was when I took it apart, except when the inner barrel is in the outer barrel it doesn't move as much as before. Also I'm having a problem getting the spring (part 329) into part 327 to install to the outer barrel part (326.) if someone that's confident in disassembly their pistol can do so to maybe post a guide with pictures on what to do it will be greatly appreciated. Gas guns frustrate me. I am very comfortable working on aeg's. Hell, my job is working on version 2,3,5,6, and version 7 gearboxes with ease. I take pride in my work too, my primary is a VFC shooting 420 FPS @ 38 RPS that's been reliable for  15,000 rounds so far (piston I can see dying soon.) Sorry to get frustrated before

Edited by Acelafan123, 09 December 2012 - 06:53 PM.


#4 Acelafan123

Acelafan123

    Enthusiast

  • Members
  • PipPip
  • 33 posts
  • Country:

Posted 08 December 2012 - 08:28 AM

Okay. I got it all together and it works but everything is stiffer. The reason is because the inner barrel assembly is stiffer in the outer barrel. It doesn't move like it used to. The reason is because I couldn't get part 333 to line up with everything else. It sticks on the wall of the inner barrel. I lined part 333 with the notch on the inner barrel like its supposed to but it acting like it isn't. Help please?

#5 Acelafan123

Acelafan123

    Enthusiast

  • Members
  • PipPip
  • 33 posts
  • Country:

Posted 08 December 2012 - 08:37 AM

Nevermind, I got it. Now I can actually have it shoot instead of jam because of a swollen bucking. Also I never pull the trigger unless I'm shooting. Idk how the trigger spring are snapping so easily.

Edited by Acelafan123, 09 December 2012 - 06:54 PM.


#6 kwaispro727

kwaispro727

    Specialist

  • Members
  • PipPipPip
  • 970 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Fishing, swimming, airsoft, real firearms, cars
  • Country:

Posted 08 December 2012 - 01:12 PM

Glad to hear you got it back together :) I'm still waiting on my M9

#7 gcw360

gcw360

    Supreme Guru

  • Super Moderator
  • PipPipPipPip
  • 11,665 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Airsoft (Especially repair and customizing), Fly Fishing, Fossils (Especially Dino), Snakes, Photography
  • Country:

Posted 08 December 2012 - 07:48 PM

Can we change the title of the thread to something like, "I wanted to smash my M9 until the Forum members helped me to find a solution to my problem"?

#8 Outlaw1995

Outlaw1995

    Guru

  • Members
  • PipPipPipPip
  • 1,713 posts
  • Gender:Male
  • Interests:Acting, Piano, Films, Theatre, Firearms, Knives, Airsoft
  • Country:

Posted 08 December 2012 - 08:17 PM

Sorry for not getting back to you in time, but I'm glad to know things worked out!!

#9 Chuck S

Chuck S

    Guru

  • Members
  • PipPipPipPip
  • 1,321 posts
  • Gender:Male
  • Location:Cleveland, Ohio
  • Country:

Posted 09 December 2012 - 06:30 AM

The Beretta M92-family trigger return spring drops right into the M9PTP.  Not sure if it's more reliable but it's commonly available.  I have one in my M9PTP as I was hoping it would add some weight to the trigger which is unrealistically light out of the box.  It didn't but I left the spring in anyway.

-- Chuck

#10 Acelafan123

Acelafan123

    Enthusiast

  • Members
  • PipPip
  • 33 posts
  • Country:

Posted 09 December 2012 - 07:59 AM

View Postgcw360, on 08 December 2012 - 07:48 PM, said:

Can we change the title of the thread to something like, "I wanted to smash my M9 until the Forum members helped me to find a solution to my problem"?
That's pretty funny but really, I did it all myself. Plus that title was more of a thing to say to get attention from more people because more attention=more hlep. I wouldn't ever smash it. I could sell it or just buy a hopup chamber from someone else.

View PostChuck S, on 09 December 2012 - 06:30 AM, said:

The Beretta M92-family trigger return spring drops right into the M9PTP.  Not sure if it's more reliable but it's commonly available.  
-- Chuck
I've considered buying a real m9 trigger spring and when my current one breaks, I will buy a real steal one.

Edited by Acelafan123, 09 December 2012 - 07:59 AM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users