Jump to content


SR 12 Upgrade ideas

sr 12 upgrade help gearbox ideas

  • Please log in to reply
2 replies to this topic

#1 muffinman1604

muffinman1604

    Enthusiast

  • Members
  • PipPip
  • 90 posts
  • Gender:Male
  • Location:PA
  • Interests:Airsoft. xbox. PC gaming, building, and programming. Football.
  • Country:

Posted 26 November 2012 - 07:42 PM

I have an SR 12 with a Madbull 6.03 inner barrel. Everything else is stock internally. (i already have wired the gun to deans)
What would you guys suggest I add parts wise to make the gun have better range and accuracy, and to make the gun perform over all better.
The max fps I can be shooting is 400 w/ 0.25's.

Edited by muffinman1604, 26 November 2012 - 07:46 PM.


#2 vanevery

vanevery

    Specialist

  • Members
  • PipPipPip
  • 981 posts
  • Gender:Male
  • Country:

Posted 26 November 2012 - 09:41 PM

This is where everyone jumps in with all kinds of different opinions.
How far are you wanting to go with it?
Open up the gearbox?
Just inner barrel related?
What is your skill level.

Truthfully, you have a great performing gun.
I would advise getting the most out of your stock gun.
Good choice on the MadBull inner barrel.
It may not give you better performance than the stock, but now that you have them both, consider using one for Flat-hopping or R-hopping. It would really help for you to pick up an extra Hop-up unit to be able to use both inner barrels and just drop them in.

Here is my Advice for bringing out the best of your stock gun.
1. New Bucking:
G&G Green bucking.
http://www.airsoftgi...roducts_id=3715
Lonex 70 degree bucking:
http://clandestineai...products_id=260
Both of these will require a drop or two of silicone oil to insert into the hop-up unit.
Pick some up at your local hoobey shop. There it is known as Shock Oil. Try 30wt.

2. Thoroughly clean your inner barrel regularly.

3. Use quality .30 bb's, nothing less

4. A good in spec Li-po.
11.1v / 1600mah / 15C
Easy withh Full-Auto.
1-2 second bursts, max

#3 muffinman1604

muffinman1604

    Enthusiast

  • Members
  • PipPip
  • 90 posts
  • Gender:Male
  • Location:PA
  • Interests:Airsoft. xbox. PC gaming, building, and programming. Football.
  • Country:

Posted 27 November 2012 - 03:56 AM

View Postvanevery, on 26 November 2012 - 09:41 PM, said:

This is where everyone jumps in with all kinds of different opinions.
How far are you wanting to go with it?
Open up the gearbox?
Just inner barrel related?
What is your skill level.

Truthfully, you have a great performing gun.
I would advise getting the most out of your stock gun.
Good choice on the MadBull inner barrel.
It may not give you better performance than the stock, but now that you have them both, consider using one for Flat-hopping or R-hopping. It would really help for you to pick up an extra Hop-up unit to be able to use both inner barrels and just drop them in.

Here is my Advice for bringing out the best of your stock gun.
1. New Bucking:
G&G Green bucking.
http://www.airsoftgi...roducts_id=3715
Lonex 70 degree bucking:
http://clandestineai...products_id=260
Both of these will require a drop or two of silicone oil to insert into the hop-up unit.
Pick some up at your local hoobey shop. There it is known as Shock Oil. Try 30wt.

2. Thoroughly clean your inner barrel regularly.

3. Use quality .30 bb's, nothing less

4. A good in spec Li-po.
11.1v / 1600mah / 15C
Easy withh Full-Auto.
1-2 second bursts, max

Thank you for the advice, and I will go pretty much as far as what I personally deem necessary. I am willing to open up the gearbox.
And i also have an 11.1 lipo already.  I will look into the buckings. I also have a King arms bucking sitting around my house, which i have heard is good. Do you have any suggestions for flat hopping? or know anyone who can r hop my gun for a relativity low price?





Also tagged with one or more of these keywords: sr, 12, upgrade, help, gearbox, ideas

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users