Whats Going On With My ATP?!
Posted 17 November 2012 - 02:23 PM
Posted 17 November 2012 - 04:11 PM
For the Slide Issue
- Field strip
- Clean the rails and all moving parts that you can with a cotton swab
- LIGHTLY re-lube
- Test the gun
For the Gas Dumping
This is more troubling and why I asked if it is a new gun. The older ATPs suffered from this because of some internal parts that needed a bit of breaking in. You can do this in yours, new or old, by adding silicone oil to the hammer assembly and working the hammer 30-40 times. Field strip the gun first, clean out and dirt, lube, actuate the hammer, reassemble and test.
Please note: All testing should be done at room temp to ensure the cold is no issue.
If the problems continue, you can send the gun to KWA for repair.
Hope this helps.
Posted 18 November 2012 - 07:33 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users