Jump to content


M1911 BBU


  • Please log in to reply
3 replies to this topic

#1 YoYo

YoYo

    Enthusiast

  • Members
  • PipPip
  • 44 posts

Posted 03 August 2009 - 09:49 PM

Alright, so if you field strip the KWA m1911 and flip the slide over you see a small hex screw on the blow back unit. If i unscrew this hex screw from the bbu will this allow me to remove the entire bbu from the slide? Or is it more complicated than that?

#2 YoYo

YoYo

    Enthusiast

  • Members
  • PipPip
  • 44 posts

Posted 13 August 2009 - 09:34 PM

Can anyone help me out here?

#3 Guest_Radix_*

Guest_Radix_*
  • Guests

Posted 14 August 2009 - 06:07 AM

It's a bit more complicated than that.  You'll have to pinch the tabs of part#23 to release it from the slide. CAUTION: the tabs may break if you put too much pressure into them. Study the parts diagram before any disassembly. http://www.kwausa.co...hp?showtopic=26

#4 YoYo

YoYo

    Enthusiast

  • Members
  • PipPip
  • 44 posts

Posted 14 August 2009 - 09:07 PM

View PostRadix, on 14 August 2009 - 06:07 AM, said:

It's a bit more complicated than that.  You'll have to pinch the tabs of part#23 to release it from the slide. CAUTION: the tabs may break if you put too much pressure into them. Study the parts diagram before any disassembly. http://www.kwausa.co...hp?showtopic=26


Thank you for the response Radix.

I will look go over the diagram and play around with things before i go any further.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users