Missing Mag fill valve o ring
Posted 12 January 2011 - 08:04 PM
So what you do is buy some plumbers tape and then cut about an inch and a half of it and twist it to make a stick. Then carefully using a small hex key push it into the outside area of the mag fill valve where the black O ring use to be. Then after you have successfully pushed in all of the plumbers tape, put a drop of silicon oil on top and do a test fill and press hard (just by filling the mag will do this) to push the plumbers tape down all the way and immediately you should see that there is no more leaks! I will add pictures soon =)
Posted 12 January 2011 - 08:12 PM
Posted 13 January 2011 - 02:04 PM
Why does KWA just put an O-ring in the valves with nothing to keep them in there?
Posted 19 January 2011 - 04:11 PM
The catch is that shipping is probably 20 dollars ;_;
edit: Just noticed the double post, if someone could delete that please?
Edited by Cakedogs, 19 January 2011 - 04:16 PM.
Posted 20 January 2011 - 04:56 AM
Posted 20 January 2011 - 11:36 AM
Posted 26 January 2013 - 03:24 PM
Posted 26 January 2013 - 03:36 PM
Posted 26 January 2013 - 04:48 PM
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users