crowley, on 09 February 2013 - 03:10 AM, said:
Ok. I understand, Thanks
I have another Question about the Safety Switch.
Without the Magazine i can enable Safety if the Hammer is cocked or at first Position.
But i cant enable Safety when the Hammer is Down.
It works again when i pull the Slide back, but when i dry Fire with over the Trigger (Double Action) the Safety wont work anymore again.
For my Understanding this is the normal behaviour and the RealSteel works similar, a lot of Guns
cant enable Saftey when the Hammer is down (Ar15...) ?
Or should the HK45 Saftey work in any Case and everytime, cocked and uncocked ?
I hope somebody can clear it for me ?
Sorry ,my English is still very bad
Crowley, your English is far better than my German which is nonexistent! What you described in your post is exactly the way the way the HK45 (KWA version) is designed to work.
You can shoot double action so long as the hammer assembly has been engaged and set by racking the slide. At this point the safety can be engaged.
If the hammer is dropped by dry firing and the slide is not allowed to cycle (no mag in gun or mag empty of gas), the gun will not fire and the safety can not be engaged.
I personally have never fielded the real steel HK45 so I can't confirm if this is the way the real gun would behave.
Perhaps someone here can chime in...Chuck?