m93r rocket valve
Posted 30 June 2013 - 11:34 PM
Posted 01 July 2013 - 11:20 AM
Posted 05 July 2013 - 11:31 PM
there's also nothing where the hammer strikes the back
Posted 12 July 2013 - 07:41 AM
Take off your slide, take out barrel, recoil spring assembly, and look in the back. Theres a set screw. I'm not sure what kind of allen wrench or screw driver you will need as I don't have the gun in front of me. Unscrew that screw using the proper screw driver,
push in the fake firing pin at the back of slide,
and use something slim to "jimmy" out the two bars holding the blowback assembly into the slide.
That should release the blow back assembly. Then, carefully remove your cylinder return springs gently,
pop out the bar holding the rocket valve and rocket valve spring in place, ensuring you've got something like a table to catch the two items from flying out,
and you're done.
Posted 25 July 2013 - 05:01 AM
and when my project is done i'll def post some pics here
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users