Jump to content


M11A1 Not Firing


  • Please log in to reply
1 reply to this topic

#1 Burned

Burned

    Newbie

  • Members
  • Pip
  • 1 posts
  • Country:

Posted 02 July 2011 - 11:39 AM

Okay so I obviously own an M11A1.. I love it, and since I've gotten it I've only put about a 1000 rounds through it. One day when I was taking it out to shoot around, I gassed up the mag and filled it with BB's, loaded it in and shot it and the bolt just moved forward as if there wasn't a mag inside. I think it's loading BB's.. just there isn't any gas being moved. I know there's gas in the mag because I hit that little button (that's right.. the little button) and gas shoots out of the mag.. so what's the problem? :D

P.S. If it helps, I use propane.

Edited by Burned, 02 July 2011 - 11:45 AM.


#2 Acorn Avenger

Acorn Avenger

    Specialist

  • Members
  • PipPipPip
  • 394 posts
  • Gender:Male
  • Location:Jersey
  • Interests:Airsoft, longboarding,punk
  • Country:

Posted 02 July 2011 - 02:37 PM

 Burned, on 02 July 2011 - 11:39 AM, said:

Okay so I obviously own an M11A1.. I love it, and since I've gotten it I've only put about a 1000 rounds through it. One day when I was taking it out to shoot around, I gassed up the mag and filled it with BB's, loaded it in and shot it and the bolt just moved forward as if there wasn't a mag inside. I think it's loading BB's.. just there isn't any gas being moved. I know there's gas in the mag because I hit that little button (that's right.. the little button) and gas shoots out of the mag.. so what's the problem? :D

P.S. If it helps, I use propane.
Propane doesn't have lube in it so it could be in need of some now silicon oil, don't use silicon spray, that can damage the gun. also the proper way to apply silicon is to put a drop on a q-tip and spread it on the area's that need to be lubed, don't use to much silicon on the gun as it attracts dust and dirt which can screw up the gun. Also for further notice, try to use green gas as propane voids warranty.

Edited by Acorn Avenger, 02 July 2011 - 02:38 PM.





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users