1911 Slide release not catching on empty mag
Posted 17 July 2012 - 05:11 PM
On the last shot, the slide does not remain open. Is this common, or do I have something broken?
The gun is out of warranty and I would like a fully functioning gun again. ANy thoughts?
Posted 17 July 2012 - 07:08 PM
Try taking a picture of the bb follower and we could tell if it is deformed or not. If it is, you need a new one. Here's the link:
Posted 17 July 2012 - 09:23 PM
Yes I can lock the slide back by manually pushing up the lever. In regards to the BB follower being worn, I have 3 mags and unless it is worn on all 3, then it may not the follower. On the other hand, i guess I need to compare to a mnew mag perhaps.
As far as part 407, It doesn't appear to may much wear, unless there is a piece broken off or something.
Posted 29 July 2012 - 11:48 AM
Posted 29 July 2012 - 12:28 PM
Posted 29 July 2012 - 12:41 PM
Posted 04 August 2012 - 04:04 PM
There's a video of it. I had the problem then got a second mag and the problem still happens. I do not believe it's the magazine.
The second mag is the original one.
Edited by SupaSteela17, 04 August 2012 - 09:40 PM.
Posted 04 August 2012 - 06:27 PM
Edited by Outlaw1995, 04 August 2012 - 06:28 PM.
Posted 21 August 2012 - 10:45 PM
Posted 30 September 2012 - 09:50 AM
Posted 30 September 2012 - 11:14 AM
If you do lubricate your bb channel in the magazine, I'd recommend cleaning it out again with a q tip to make sure everything is dry.
Posted 04 December 2012 - 05:45 PM
Infact while I am here...KWA please make this part out of steel and not pot metal...it keeps breaking and I am tired of my team mate complaining about it. Let me know when you make one out of steel.
Edited by Maginus, 04 December 2012 - 05:46 PM.
Posted 04 December 2012 - 10:12 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users