KWA M4S just jamed
Posted 23 June 2008 - 07:03 AM
was running my KWA M4S for the second time on that field in about 3 months. gun had been flawless.
im running a 11.1 1500 mah lipo battery
i have made NO changes to the gun other than to ad a scope and a front grip.
i was playing about 15 min into the op had fired off about 500 rounds 1 mag change and then i hear a zip and then the gun stops firing. no noise nothing when i pull the trigger.
i take it back to base pull the battery and find the fuse is burned through. It is a 15 am fuse i put in the only fuse i have a spare 20 amp from a CA gun that i own. i test fire it and hear and eave shorter high pitched zip and the 20 a fuse is now burned through.
i put the gun away and had our group airsmith take a look at it later at home in controled environment. he pulled the gear box out but did not crack it open and found the following items.
pics speak louder than words.
Im going to call the Retailer i pick this gun up from AEX Santa clara and see if they can help me out.
other wise im hoping this gets noticed by the Support group for KWA and they give me shout via emai.
btw while this gun worked it was rock solid and consistant and was a terror on the field :-)
Posted 23 June 2008 - 07:43 AM
Posted 23 June 2008 - 09:51 AM
Posted 23 June 2008 - 10:37 AM
The little bit in the last two pics was weird, too. Didn't notice it right away (it was hard to see past the bearing failure ) but the two parts seem to be connected or are different ends of the same piece. Definitely doesn't seem like it should be where it is, but there was no gearbox diagram on this site so I couldn't tell if this was a displaced anti-reversal latch release (of which feature I hadn't heard of this gun possessing), or some other broken internal part which might have caused the box seizure initially and then been displaced.
Edited by jdegraff, 23 June 2008 - 10:36 AM.
Posted 23 June 2008 - 12:54 PM
Posted 23 June 2008 - 10:14 PM
thats good news!! I hope they have the same service in Asia.
good luck man!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users