Differences with Tokyo Marui's MP7?
Posted 04 January 2013 - 09:48 PM
Now, yes I know there are youtube videos out there depicting the differences, but I'd like to get some more opinions out of others.
If you notice the wording in the topic, I'm just asking for differences between the two in terms of function, look / feel, etc. Not what is better, because that would garner some pretty biased posts, obviously.
Thanks in advance guys
Posted 05 January 2013 - 08:12 AM
I'd go with the KWA MP7.
Posted 05 January 2013 - 02:08 PM
It'd be much less of a hassle if I just got the KWA one since I live in the states. Thanks for the reply.
Posted 25 January 2013 - 12:52 PM
Posted 25 January 2013 - 03:36 PM
Posted 25 January 2013 - 04:42 PM
Both mp7's function the same, have the same fire controls in the same place..basic differences would be the hop up adjustment placement..kwa is at the front of the smg, above the barrel, which when adjusting hop up makes you put your hand in front of the muzzle if your not paying attention, the tm is as you probablly already know from all the vids, in the ejection port, by pulling the trigger towards the front and up..will bring the adjustment dial into position in the port. Kwa shoots alot hotter out of the box. That could be good or bad..tm shoots mildly on the low side between 330-340, this is on gg, but they do recommend duster gas. Imo the tm shoots great..just as good as the kwa, and tm has more recoil, which is nice. There are upgraded nozzles, tbb, power up valves, enhanced springs for the tm already..and im sure more things will hit the market soon.
So if you have the money, buy the tm..if you dont want to go thru the hassle of ordering overseas and the possibility of dealing with customs, buy a UMAREX mp7..
( o Y o )
Posted 25 January 2013 - 04:59 PM
IMO, the need to buy upgradable springs and better parts to improve functions has one advantage, and one disadvantage. The advantage being that other companies' parts are compatible and you can fine tune your gun to perform a specific way. The disadvantage is that sometimes these parts become necessity and the gun you bought the parts for is most likely not out-of-the-box ready. I'm not claiming the MP7 by TM is that way, but I do like the certainty of KWA's solid gas system and sturdy construction, their availability on parts should you need to replace something, as well as eager customer support team.
Posted 25 January 2013 - 09:32 PM
Posted 25 January 2013 - 10:01 PM
Because they can't call it MP7, try searching TM NP7.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users