Numerous Atp Issues
Posted 10 November 2011 - 08:19 PM
I have the issue of the mag leaking down the barrel, I made sure the recoil bumper was installed correctly which on this version looks like it was put in backwards.
ATP kept randomly venting gas down the barrel and not always cycling lubed the hammer and trigger mechanistic which seemed to help for a few mags, not the slide is basically frozen and I can't break the gun down any advice? Little disappointed to be honest have a KWA HK and it functioned flawlessly out of the box.
Posted 10 November 2011 - 08:27 PM
Posted 10 November 2011 - 08:41 PM
Posted 11 November 2011 - 11:24 AM
Posted 13 November 2011 - 05:25 PM
Posted 13 November 2011 - 08:27 PM
You too should jump on the help desk for a warranty repair. they will tak care of your issues.
Posted 15 November 2011 - 04:02 PM
Posted 15 November 2011 - 09:55 PM
I tore down the ATP completely and thoroughly cleaning and re-oiling. In doing so I found the recoil bumper had been installed backwards I installed the recall bumper properly adding a few drops of loop to the front facing section. The section of the ATP which required the most attention was the hammer and striker components. With the hammer up I oiled the hammer and striker sections of the assembly was a liberal amount of lube.
Once the ATP was reassembled I worked the receiver in a cocking motion as well as dry firing ATP. This was done in the hopes that the parts were better break-in and run smoothly.
Currently I have had no issues with my ATP after firing three full mags at different temperature ranges.
A properly working ATP fires crisp, quick and with decent recoil. I'm very pleased with the ergonomics and overall body design of the ATP. Form myself the pistol is very easy to manipulate and transition with. With features that many real still shooters can understand and appreciate.
I am extremely happy with my purchase of a KWA ATP.
Posted 16 November 2011 - 05:24 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users