Jump to content


Official KWA LM4 Photo Gallery

official lm4 kwa ptr ptr2 photo pictures gallery

  • Please log in to reply
382 replies to this topic

#361 Downs

Downs

    Newbie

  • Members
  • Pip
  • 28 posts
  • Gender:Male
  • Location:MCAS Miramar
  • Interests:Shooting for fun and competitively, motorcycles, cars, jeeps, racing, 4-wheeling, flying, camping, hiking.
  • Country:

Posted 02 May 2014 - 06:38 AM

View Postgcw360, on 22 March 2014 - 12:00 PM, said:

Basically only fact that I would use it on a real firearm. I like the adjustable height and the 2X converter that is included is a nice addition. To be honest though, if you are only using it for airsoft and unless you have the money to burn, go with the less expensive option. We should get back on topic now.

I've used the PA Micro-dot on my real AR-15s.  My dad uses one on his duty AR15 as well.  

I've beat the hell out of mine on real steel as well as airsoft gear, as have many others.  It's a solid optic, probably one of the best bangs for your buck out there IMO.

#362 Wolf9653

Wolf9653

    Newbie

  • Members
  • Pip
  • 3 posts
  • Gender:Male
  • Location:Dayton, Ohio
  • Interests:MilSim Airsoft, CS:GO
  • Country:

Posted 02 May 2014 - 09:46 AM

View Postkwaispro727, on 02 May 2014 - 06:19 AM, said:


Looking good!

Thanks. The most challenge part of this build is the increased the barrel length, because the LM4 barrel(both inner and outer) are proprietary.The inner is mod out of a ksc m16 500mm barrel. The outer barrel is KWA part #43 and two #64s.

#363 kwaispro727

kwaispro727

    Specialist

  • Members
  • PipPipPip
  • 970 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Fishing, swimming, airsoft, real firearms, cars
  • Country:

Posted 04 May 2014 - 09:56 AM

I believe there is something around 500mm made by Falcon that is a drop in but I haven't been able to find one apart from on Ehobby and naturally that one has been out of stock.

#364 PJ-P09

PJ-P09

    Enthusiast

  • Members
  • PipPip
  • 45 posts
  • Gender:Male
  • Country:

Posted 04 May 2014 - 05:19 PM

Here i proudly present you my LM4 setup, i just bought it to a teammate but it has been in my hands for 3 months, in that time i installed some forniture and made some mechanical mods to make it work better. It still has the stock front iron sight and PTS MOE/KAC RIS but is under WIP. Sadly as it was purchased in europe it's the KWA asia version(the same as KSC) so i can't use the KWA-USA HopUp unit yet, until i buy a new barrel with the new cut version (i already bought all the hopup unit)
Hope you like it

AAC 51T Blackout
Posted Image

Posted Image

51T BattleComp + Heavy barrel
Posted Image

Standart barrel suppressed
Posted Image

CQB config:
Posted Image

When i have the shorter outer barrel and a new inner barrel i'll cut the stock inner barrel so i can made the CQB configuration propertly not like this, btw here's a close pic of the battlecomp
Posted Image

Current setup:
->Clone KAC RIS
->Clone BigDragon AAC 51T BattleComp Mod -> Link
->Clone ArmyCode AAC M2000+Blackout 51T -> Link
->Clone Magpul RVG -> Link
->Clone Magpul MAID -> Link
->Clone Magpul CTR -> Link
->Clone Magpul RSA
->Clone Magpul Ladder Rail Covers -> Link
->Clone Magpul BAD, the RS that i had before is broken due to the adaption that i made to fit the
Magpul lower -> Link
->Clone Magpul Enhanced Rubber Butt-Pad, 0.70"
->Clone LaRue RISR -> Link

->PTS GoGun Gas pedal -> Link
->PTS RainierArms Ambi Charging Handle -> Link
->RS Magpul ASAP
->RS LaRue POD
->Copy G&P EoTech 552
->Copy G&P EoTech x3 Magnifier
->Copy VFC Inforce V3x

Mechanical modifications:
->PowerStroke Mod -> Link Link2
->Nozzle plug Mod -> Link
->Double feed Mod: instead of the mod proposed by boobiegbb, which was dremelling the barrel to put a o-ring to prevent the hop from moving, i just put some adhesive tape to make the step enough to keep it in place; it works perfect and don't need to modify the barrel.



Next steps:
Cosmetic:
->Crusader BadAss ambi selector -> Link
->PTS MegaArms skeleton trigger (if fits)
->(Madbul) Noveske/Spikes/Troy/KAC URX rail
->Dytac 12" KAC outer barrel and gas block -> Link
->Anti rotation link, i don't know where i can find some compatible and cheap, and neither how to  
   install it; any help will be usefull
->Magpul MBUS 3Gen/Pro/KAC sights -> Link
->Magpul ranger plates for PMAG
->Cool looking dust cover

Mechanical:
->I'm planning to make some [barrel extension] buffers using a 3D printer, but i don't own a printer so..
->Dobey mod to improve smoothness in the back-travelling of the nozzle into te bolt carrier. -> Link
->Boobiegbb hammer mod for quicker trigger response -> Link That's only the teaser video i can't  
   find the guide, if someone knows how to do this please tell me.
->ESD EVO II Hop Up Tensioner Set -> Link
->ESD EVO II Hop Up Housing-> Link  Not sure if it worth it, if anyone have it please make a review
->Falcon/KM/Edgi/RaTech... 6.02/1 inner barrel -> Link
->In future when it'll be relised Svoboda AAC bolt and maybe the AAC UpperReciever
Posted Image

Posted Image

Edited by PJ-P09, 04 May 2014 - 05:34 PM.


#365 Jeffsworkshop

Jeffsworkshop

    Enthusiast

  • Members
  • PipPip
  • 73 posts
  • Country:

Posted 09 May 2014 - 02:58 AM

The Svoboda prototype receiver is based entirely on the WA system. The only relation it has with KSC/KWA is that it is modified to use the KSC/KWA magazines.

Nice LM4 BTW!

#366 PJ-P09

PJ-P09

    Enthusiast

  • Members
  • PipPip
  • 45 posts
  • Gender:Male
  • Country:

Posted 09 May 2014 - 05:33 PM

you're right, bad news for me
"Our system is not KWA/KSC so..can't combined KWA parts , just can use KSC magazine to our system"

Edited by PJ-P09, 09 May 2014 - 05:39 PM.


#367 Shaggy

Shaggy

    Enthusiast

  • Members
  • PipPip
  • 55 posts
  • Gender:Male
  • Country:

Posted 09 May 2014 - 09:22 PM

Posted Image

Posted Image

Posted Image

External: Front to Rear
220mm Barrel Extension
KWA KM4 R.I.S. Rail
Bi-pod
Magpul PTS RVG Vertical Grip
Leapers 3-12x44 Scope
KWA KM4 R.I.S. Crane Stock
I just added the Magpul B.A.D. Lever

Internal: Front To Rear
Evo II with Maple Leaf Bucking
Blowback Armory CNC Buffer Catch
Angry Gun Super Recoil Kit
I did the C clip mod to the barrel, the bolt catch mod and treated the hole gun with Frog Lube

#368 Red_Fox_1

Red_Fox_1

    Newbie

  • Members
  • Pip
  • 1 posts
  • Country:

Posted 13 May 2014 - 07:29 AM

Well I'm kind of a N00b to the LM4 scene. I just got mine in trade a few weeks ago, but I've been able to do a decent amount of work. I've replaced the nozzle return spring, installed a guarder bucking with RATech tbb, and some exterior work. I bought 5 mags(came with 3), 7 are Stan, 1 is a pmag I bought used. I still have some work to do. I have a Magpul K grip in FDE in the mail, I'm going to get an NPAS, BBA buffer stop, and a Kryptek Highlander paint job. I'll post a finished product once I'm all done, could be a while. None the less, here is what I have now.

Posted Image

Posted Image

#369 TeamTRBnyc

TeamTRBnyc

    Newbie

  • Members
  • Pip
  • 1 posts
  • Country:

Posted 15 May 2014 - 03:18 PM

Just a picture to show our LM4's setup as a team..

-TeamTRBnycAttached File  198kwa.jpg   189.07K   96 downloads

#370 kwaispro727

kwaispro727

    Specialist

  • Members
  • PipPipPip
  • 970 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Fishing, swimming, airsoft, real firearms, cars
  • Country:

Posted 16 May 2014 - 04:57 AM

View PostTeamTRBnyc, on 15 May 2014 - 03:18 PM, said:

Just a picture to show our LM4's setup as a team..

-TeamTRBnycAttachment 198kwa.jpg
I like the top one.  It looks like mine.

#371 MangoM4

MangoM4

    Newbie

  • Members
  • Pip
  • 2 posts
  • Gender:Male
  • Location:804
  • Interests:God & Country ,Milsim, Airsoft,Paintball,AR-15, Linux, Computers, Preparedness, Logistics ,Tactics, Ham Radio (KK4TYE)
  • Country:

Posted 21 June 2014 - 04:25 PM

My LM4C
<a href=

RA Tech Complete Hopup and 363mm Inner Barrel
MadBull Gemtech G5 QD Barrel Extension
MadBull Noveske NSR 7
RS BCM GUNFIGHTER Grip Mod 3
RS BCM GUNFIGHTER KeyMod Vertical Grip SHORT
RS B5 Systems Bravo Stock
RS B.A.D. Lever (soon)
PTS GoGun Gas pedal (soon)
Blowback Armory CNC Buffer Catch

I did the C clip mod to the barrel

Attached Files


Edited by MangoM4, 01 September 2014 - 01:37 PM.


#372 kwaispro727

kwaispro727

    Specialist

  • Members
  • PipPipPip
  • 970 posts
  • Gender:Male
  • Location:New Jersey
  • Interests:Fishing, swimming, airsoft, real firearms, cars
  • Country:

Posted 01 August 2014 - 07:10 AM

Long range LM4 completePosted Image
External:
RS FAB Defense GLR16 stock
RS FAB Defense AG-43 grip
RS FAB Defense magwell grip
RS Magpul aluminum trigger guard
RS Magpul AFG II
RS Magpul Gas Pedal
AIM 1.5-4x30 scope
APS 150mm "sub-sonic" [barrel extension]
Replica VTAC Extreme battle rail (11inch)
Internal:
Falcon 6.01 509mm inner barrel
KSC Maple Leaf Diamond Hop set
RA-Tech EVO II hop-up housing
Shaved rocket valve

#373 KLBI

KLBI

    Newbie

  • Members
  • Pip
  • 9 posts
  • Country:

Posted 03 August 2014 - 01:10 PM

Posted Image

Here's my relatively new LM4. I've had it for less than a year but it's been used quite a lot.

Externals:
Madbull JP Compensator
Madbull Noveske NSR 13.5 inch Keymod
Primary Arms Micro Dot
Magpul PTS GBB trigger guard
RS Magpul MIAD drip
RS Magpul MOE stock

Internally I have an RA tech tightbore and Maple Leaf evo II hop with the bucking and tensioner.

Edited by KLBI, 03 August 2014 - 01:30 PM.


#374 DarkCobra262

DarkCobra262

    Newbie

  • Members
  • Pip
  • 11 posts
  • Country:

Posted 21 August 2014 - 11:46 AM

View Postkwaispro727, on 01 August 2014 - 07:10 AM, said:

Long range LM4 completePosted Image
External:
RS FAB Defense GLR16 stock
RS FAB Defense AG-43 grip
RS FAB Defense magwell grip
RS Magpul aluminum trigger guard
RS Magpul AFG II
RS Magpul Gas Pedal
AIM 1.5-4x30 scope
APS 150mm "sub-sonic" [barrel extension]
Replica VTAC Extreme battle rail (11inch)
Internal:
Falcon 6.01 509mm inner barrel
KSC Maple Leaf Diamond Hop set
RA-Tech EVO II hop-up housing
Shaved rocket valve

Did you have to modify the magwell grip or did it just go on easy?

#375 LuciusAS

LuciusAS

    Newbie

  • Members
  • Pip
  • 1 posts
  • Country:

Posted 16 September 2014 - 05:31 AM

Greetings, American people!
These greetings I send you from cooold Russia!)
Finally bought an LM4 rifle and modified it, but only externally. Planning to do some inner mods that were invented by ingenious gentlemen for that baby.
The version is TW, but pretty similar.
My idea was to make carbine as lightweight as possible. So now it weights about 2.4 kilos w/out mag and 3 kilos with fully charged mag.
What do you think about this build, comrades? Is sick enough to be in your party? XDAttached File  image.jpg   117.01K   26 downloads

#376 SR105

SR105

    Tech

  • KWA Staff
  • PipPip
  • 168 posts
  • Gender:Male
  • Location:Walnut, CA
  • Country:

Posted 17 September 2014 - 12:49 PM

LM4 PDW!!!
Posted Image

#377 PJ-P09

PJ-P09

    Enthusiast

  • Members
  • PipPip
  • 45 posts
  • Gender:Male
  • Country:

Posted 18 September 2014 - 03:20 PM

God damm thats sexy, what stock is it? is the WE 416c stock?

#378 PJ-P09

PJ-P09

    Enthusiast

  • Members
  • PipPip
  • 45 posts
  • Gender:Male
  • Country:

Posted 30 September 2014 - 12:41 PM

And 4 months later......
It's about 90% progress

Posted Image

The optics are a bit "old" for this setup, i'm guessing something like Trijicon SRS
A few more pictures
Spoiler

Detail of the new Glass Breaker
Spoiler

Front end detail
Spoiler

Rear end detail
Spoiler

I have a little problem with the barrel or the handguard, not sure which of them is. The problem is that the barrel is not centered into the handguard.Can anyone help me with this please?

Spoiler

KitList
After more than one year of intense usage she needed some paint job so i "Krylon'ed" her, now has a sexy mate black finish.
Spoiler

And the last jewel installed a few minutes ago: ESD+MapleLeaf+RaTech precision tandem
Fully assembled is a beauty :3
Spoiler

Edited by PJ-P09, 30 September 2014 - 01:09 PM.


#379 Pyro_Buster

Pyro_Buster

    Enthusiast

  • Members
  • PipPip
  • 134 posts
  • Gender:Male
  • Location:California
  • Country:

Posted 04 October 2014 - 05:29 AM

When it came Thursday afternoon, it was stock. This is what it looked like 3 hours later.

Posted Image

Posted Image

Edited by Pyro_Buster, 04 October 2014 - 05:44 AM.


#380 Pyro_Buster

Pyro_Buster

    Enthusiast

  • Members
  • PipPip
  • 134 posts
  • Gender:Male
  • Location:California
  • Country:

Posted 12 October 2014 - 09:38 AM

Update!

Posted Image

Posted Image





Also tagged with one or more of these keywords: official, lm4, kwa, ptr, ptr2, photo, pictures, gallery

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users